With around 140 million units sold, the Nintendo Switch is one of the most successful gaming consoles ever. No wonder the 3D printing community started to create a huge range of custom Nintendo Switch mods and accessories to enhance the functionality of the popular console.
There are many accessories, attachments, and mods available for the Nintendo Switch. There are cases and covers for the console that can be used for protection, aesthetics, or both. Similarly, game cartridge cases provide a place to sort and store your collection. There are different stands and mounts that add to the functionality of the console in some way, and there are custom controller grips to improve the handheld feel of the Joy-Con.
Using a desktop 3D printer, making most of these Nintendo Switch mods should be child’s play. But if you’d rather leave the printing to the professionals, check out Craftcloud to find the best option for you.
Cases & Covers
We’ll start with the basics. Here are some covers and cases that will keep your Switch safe and protected, and might even add some extra functionality.
Hinged Switchbox
This is a secure carry case for the Switch. The maker, Zippitybamba, has made four previous versions of the Switchbox with different configurations. This is version 5, and it can store the handheld console and up to four Switch game cartridges.
You can also use the Switchbox as a display stand, with the screen propped up on a slot in the case. Best of all, the case is assembled in no time at all. All you need are the 3D printed parts, screws, foam sheets, and glue.
- Who designed it? Zippitybamba
- How printable/popular is it? This travel case for the Switch has five successful custom makes and a remix to fit thicker foam.
- Where to find it? Thingiverse
Sun Shield
Looking to play with your Switch outside but the glossy screen is preventing you from getting your gaming on? You can 3D print this DIY sun shield to block out the light and enhance your visual experience.
The maker suggests printing this shield with a layer height of 0.2 mm and without any infill, rafts, or supports. The clamps are a bit loose, so tape is recommended to protect the screen from potential scratches.
- Who designed it? reini1305
- How printable/popular is it? This design has been downloaded over 5,900 times, and over 630 users have liked it.
- Where to find it? Thingiverse
The Switch Pail
This might be the ultimate travel case for your entire Switch system. When completed, this 3D print will hold 4 controllers, 4 wrist straps, a Switch console, and up to 10 game cartridges. Basically, this is the case you want if you’re going to travel with your Switch and accessories.
You’ll have to assemble the pieces with extra screws, and the parts will take a while to print. Other than that, this shouldn’t be a problem to recreate!
- Who designed it? Zippitybamba
- How printable/popular is it? At the moment, this organizer has over 3,000 downloads and 2 successful makes.
- Where to find it? Thingiverse
Stands & Mounts
Next, we have some mounts, docks, and stands for your Switch. Whether you need a better way to charge or want a hands-free gaming experience, there’s something for everyone!
SwitchRest
It can be tiring to play in the back seat, especially if you have to hold the console in your hands for a long time. Solution: Print this, slide in the Switch, and start playing.
A lot of thought went into this design. This holder has an angled bracket to allow air intake, so the Switch has breathing room to prevent overheating.
- Who designed it? benmarte
- How printable/popular is it? Currently, this mod has almost 31,000 views as well as 4,300 downloads.
- Where to find it? MyMiniFactory
Tears of the Kingdom Dock
A new favorite game for many Switch owners is the “Legend of Zelda: Tears of the Kingdom”. With this model, you can give your switch dock a complete makeover with Zelda-inspired designs all around the dock. This model was updated to make it easier to print, separating the side panels from the main body to be assembled after printing.
It’s a great model for color-swapping filament to get a nice dark base color while accenting the intricate details of the side panels. You’ll find plenty of variations in the files, so feel free to print your dock however you wish.
- Who designed it? mbreseghello
- How printable/popular is it? Already earning over 20,000 downloads, you will find 81 Makes for this dock.
- Where to find it? Thingiverse
Alternative Dock
This tastefully designed dock offers a personalized and more compact alternative to other bulkier designs. Using all the parts from the original dock, this model is a perfect option for those who are looking to upgrade the stock dock provided by Nintendo.
This model comes in separate parts and requires eight machine screws, a piece of felt, and the components from the original Switch dock.
- Who designed it? kwigbo
- How printable/popular is it? This reconfigured dock has nine makes and two remixes on Thingiverse.
- Where to find it? MyMiniFactory, Thingiverse
Guardian Stand
This DIY Nintendo Switch holder was created for The Legend of Zelda lovers who want to display their console and fandom at the same time. The design is inspired by the Guardian character featured in “Breath of the Wild”.
Prop up your Nintendo Switch, or even your smartphone or tablet, with the flare of a diehard Zelda fan. This 3D printable Nintendo Switch stand isn’t made for portability, rather it’s a decorative home or office accessory.
Be warned, though: The estimated print time is a lengthy 20 to 25 hours. It’s advised to amp up the infill for this print, mainly to provide additional robustness and strength. The available files include the assembled design and the individual parts, so any size print bed can be used.
- Who designed it? jaedoel
- How printable/popular is it? This unique-looking stand for the Nintendo Switch has over 11,700 downloads and 9 successful makes.
- Where to find it? Thingiverse
Crystal Switch Dock
Give your Switch a new place of honor next to your television with this unique docking platform. The crystal formations fit snuggly onto your existing switch charging dock for a personalized look.
This is definitely the type of print that benefits from a multicolor filament, like a rainbow PLA, with many of the makes showcasing gorgeous prints using these filaments. You can find some great variations in the remixes as well, including a Switch OLED variant and a wall-mountable dock.
- Who designed it? NameIsLoading
- How printable/popular is it? Out of the 2,000 downloads this model has, 29 have shared their makes.
- Where to find it? Thingiverse
Charging Stand
This 3D printable Nintendo Switch charging stand can hold your Switch and look good while doing so. It’s a beautiful DIY charging stand that allows you to prop up and charge your Switch. What makes this model unique is the thought-provoking staircase-like design that includes the Nintendo Switch logo.
This unique print requires support structures in the cable tunnel. The model pictured above is printed in shell mode without infill, though you might like to go for something a bit stronger for everyday use.
- Who designed it? forestfee
- How printable/popular is it? This charging stand, which has been downloaded over 8,800 times, has 3 makes and 1 remix.
- Where to find it? Thingiverse
Portable Charging Stand
This portable stand allows gamers to charge their Nintendo Switch in a more portable and compact fashion. This 3D printable accessory is optimal for users who want to play in portable mode and charge their Switch simultaneously, which the official dock doesn’t support.
This model will be quick to print but does require supports, along with suggested print settings of a 0.15-mm layer height and an infill of 20%. However, it’s recommended that support be disabled while printing the hinges.
- Who designed it? Ospi
- How printable/popular is it? This stand has more than 5,600 downloads and 4 makes.
- Where to find it? Thingiverse
Adjustable Stand
This multi-piece stand for your Nintendo Switch allows you to adjust the height and angle of your Switch to your liking. While it’s not that complicated to print, it still requires multiple pieces and assembly.
It’s recommended to print the parts at a 0.25-mm layer height with 25% infill. The maker also suggests printing the cradle part on its side with supports enabled. Finally, for assembly, the hinges can be put together using raw 1.75-mm filament.
- Who designed it? d34d
- How printable/popular is it? The functional stand has 33 makes so far and has been downloaded around 50,000 times.
- Where to find it? Thingiverse
Arcade Cabinet
This arcade cabinet-style stand for your Nintendo Switch is a blast from the past! This mod allows you to experience the retro feel of an arcade cabinet with all of your games, old and new.
To put it together, you’ll need to print multiple pieces, acquire some outside components, and assemble them. All the additional electronic components are listed on the project page.
- Who designed it? concavechest
- How printable/popular is it? The cabinet has reached almost 83,000 downloads with 28 successful makes.
- Where to find it? Thingiverse
Cartridge Cases & Holders
We’ve seen cases for the console itself, but what about all your games? If you want a nice way to store and organize your cartridges, these are the prints for you.
Question Block Cartridge Box
Stylized in the form of the Question Block from Super Mario, this cartridge case is perfect for longtime fans of the Nintendo brand.
It’s not difficult to print, and just 10% infill should be sufficient, but it does require 4.5-mm screws to complete.
- Who designed it? Kickass3DPrints
- How printable/popular is it? This cartridge case is very popular thanks to its iconic design. It has 151 makes and 48 remixes, so you know it can definitely be done.
- Where to find it? Thingiverse
Toaster Cartridge Holder
The hottest games call for a mini toaster holder! Let the fun start even before breakfast is ready. This container will keep your favorites within easy reach. You can also use this template to check the accuracy of your printer’s calibration.
There are three files, one of which is the full version with the logo. There’s also one with a separate logo and toaster if you want to print them with a different color or material. This project is an excellent opportunity to take advantage of the filament at the end of a spool.
- Who designed it? Heizung95
- How printable/popular is it? With more than 3,000 downloads, 31 makes, and over 360 likes, this is a good option to make your gameplay more fun.
- Where to find it? Printables
Mushroom Cartridge Holder
This Mario-themed mushroom can hold all of your favorite Switch game cartridges, keeping them safe under the mushroom-cap lid. The simple cartridge holder is great for kids as it gives them a clear place to put games once they’re finished playing with them.
The model doesn’t require any supports, though they’re recommended for a finer finish. All of the parts are separated by color, allowing them to be printed in whatever colors you choose before assembly. Scale the model up if you need to fit more game cartridges inside of it.
- Who designed it? RWBDesigns
- How printable/popular is it? This little mushroom has already been downloaded over 1,400 times!
- Where to find it? Cults
Dock Cartridge Holder
Next up is an attachable accessory to store your gaming cartridges. This mountable 3D printed component will allow you to store up to six cartridges right on your Nintendo Switch console. Simply attach it to the door on the back of the original Switch dock.
It’s an easy, support-free print, but the cartridge slots might need to be slimmed down for a tighter fit.
- Who designed it? diarx
- How printable/popular is it? This holder has over 12,000 downloads, 26 makes, and 10 remixes.
- Where to find it? Thingiverse
Turtle Shell Container
If you want to go beyond the arguably more traditional Mario-themed question block and mushroom, the turtle shell container might just be what you’re after. In addition to being eye-catching, this case is tough and durable. You won’t have to worry about painting the finish as long as you have the right filament colors!
The turtle shell itself is available as a free file, but if you like the template for storing your games, you can find the full version with an organizer for purchase on Cults. The hull was made to fit with four 8×3 mm magnets, and all parts have markings to help with assembly.
- Who designed it? PLA-N-PA
- How printable/popular is it? This model has more than 4,700 downloads and 12 makes across both sites.
- Where to find it? Thingiverse, Cults
Pokéball Cartridge Case
This Pokémon-themed cartridge holder can hold eight cartridges and opens with a spring release mechanism. And it looks pretty cool, too.
There are five parts that should be straightforward to print; the spring-release assembly can be a bit tricky, though. To get the original look, you need to print it with black, white, and red filament.
- Who designed it? samk3ys
- How printable/popular is it? The Pokéball is quite popular, with more than 37,000 downloads and 15 makes.
- Where to find it? Thingiverse
NES Game Cartridge Holder
This is an updated version of a very niche model. This NES game cartridge contains enough space to hold up to 12 of your favorite Switch games, making it a great case for game storage or traveling. This newer model was redesigned to be more rigid and durable than the original.
To customize your carry case even further, you can print out an NES game label and glue it onto your print to give it a more authentic look. While you can definitely print this model in PLA just fine, PETG is recommended for a long-lasting friction fit.
- Who designed it? FlyingPurpleCow
- How printable/popular is it? You’ll find 11 makes shared for this model, with almost 600 downloads to date.
- Where to find it? Printables
Game Stand
This simple cartridge case holder allows you to proudly display up to 12 games in all their glory. In addition, you can print the Nintendo Switch logo and add it to match the rest of your accessories.
If you’re struggling to print the letters, a maker (who successfully made the stand) has offered some suggestions for printing them with ease.
- Who designed it? Mark579
- How printable/popular is it? The branded game case stand has 99 makes and 14 remixes.
- Where to find it? Thingiverse
Joy-Con Grip & Cartridge Case
This Joy-Con grip and game case is perfect for traveling and playing on the go. It holds eight cartridges in two compartments.
The grip has the same snap-lock features as the official Joy-Cons, so you have to use the release buttons on the back to take them off the holder. The logo was 3D printed separately and then glued onto the shell.
- Who designed it? asbeg
- How printable/popular is it? A couple of commenters have mentioned the thin walls, but others report printing success. The design has been downloaded over 6,600 times and it has more than 1,500 likes.
- Where to find it? MyMiniFactory
Master Sword
This is a complete replica of the Master Sword from The Legend of Zelda video games. This sword has the ability to vanquish evil along with storing your Nintendo Switch cartridges.
The 3D model files include both the sword and the sheath. There are cartridge slots in the sword’s blade, and it can store up to eight cartridges.
To make printing easier, the maker split the sword into parts, which you can then glue together. You can find all the print settings, printing notes, and post-printing notes on Thingiverse.
- Who designed it? kinderhousen
- How printable/popular is it? There are 4 makes of this remix, and the STL file has been downloaded over 2,000 times.
- Where to find it? Thingiverse
Borderlands Crate
This is a loot chest that you can find in the Borderlands video game. The maker took inspiration from ChaosCoreTech’s Mini Borderlands Loot Chest, but modified it to store Switch cartridges.
Borderlands is a game set in the distant future, with your playable characters on a planet called Pandora, where there are many loot chests and containers. This particular chest is called the “Red Chest,” and you can find weapons and ammunition in it.
You can paint the 3D printed crate to resemble the chests in the game, something that many makers have done successfully!
- Who designed it? NateCreates
- How printable/popular is it? The loot chest is an easy print with only three parts. There are nine successful makes, a few of whose paint jobs are a must-see.
- Where to find it? Thingiverse
Bokoblin Chest
In Zelda’s “Breath of the Wild”, a Bokoblin chest is a sort of treasure chest that you can frequently encounter. Bokoblins have their own camps that can be heavily guarded, and this is where they store their chests. You’ll find precious items such as weapons or gemstones in them.
In reality, this 3D printed chest can store up to 14 switch cartridges. You’ll need to enable supports while printing it (the maker suggests using tree supports). To wrap things up, simply cut a couple of lengths of 1.75-mm filament to “link” the hinges, then melt the end to secure them.
- Who designed it? aardimus
- How printable/popular is it? This cartridge holder has 18 makes and 6 remixes in a variety of filaments and post-processing jobs that are worth checking out.
- Where to find it? Thingiverse
Controller Mods & Accessories
A huge part of the Switch setup is your choice of controller. Here are some storage solutions and other upgrades to look after it.
BMO Chassis
BMO is a playful robot from Adventure Time and a loyal companion to characters Finn and Jake. Above all, he likes playing games. The creator of this incredible model is a big fan of the series, and they decided to make their own BMO after being disappointed with what they found on the web.
This detailed model features arms with magnetic fasteners, and the screen fitting allows you to fit both the OLED and Classic versions of the Nintendo Switch. To make your own BMO, you will need 14 strong 6×2 mm magnets, super glue, and a putty knife to remove supports. The creator recommends using 15% infill and 3 walls. To make the assembly process easier, it’s important to carefully follow the instructions.
Joycon Controller with Trigger Buttons
Some games call for a more comfortable grip for our hands, especially if you’re already used to classic joystick models. This cool model protects your joystick with a structure, making it a comfortable choice for long gaming sessions. You can also choose a special filament to reflect your style.
You will find a G-code file and three templates, one of which is experimental, on the Printables page. No additional supports are needed, but you will need some patience and post-processing time to properly remove the built-in supports from the trigger.
- Who designed it? Semmel
- How printable/popular is it? This popular controller has an incredible 22,000 downloads and 461 makes.
- Where to find it? Printables
D-pad
One of the most glaring criticisms that the Nintendo Switch has received is the elimination of the classic D-pad function on the controller. Now, thanks to one innovative gamer, you can give your Joy-Con controller a retro feel with these D-pad modifications. This allows you to bring the Joy-Con back to your favorite gaming era.
To avoid wear on your Joy-Con, the maker recommends using TPU for the print. The mod requires hands-on installation involving double-sided tape.
- Who designed it? EmperorFaiz
- How printable/popular is it? This simple D-pad mod has 465 likes and over 13,000 downloads.
- Where to find it? Thingiverse
Joystick Extender
This is a 3D printed joystick extension that gives the player more control over the gaming experience. The simple component extends the height of the Joy-Con’s joystick to allow for better control as well as more precise analog movement.
This accessory was inspired by professionally modded video game controllers that use the same extension style for similar purposes. ABS might be a more suitable choice than PLA due to its better flexibility.
As this is a small part, you can print it with an infill of 70% to 100%. If the extender feels loose on the joystick, you can place a small piece of paper between them.
- Who designed it? EmperorFaiz
- How printable/popular is it? This is a single piece that can be printed quickly and tested on the joystick. There are more than 20,000 downloads, 993 likes, and 11 successful makes.
- Where to find it? Thingiverse
Pro Controller Stand
Storing multiple controllers always occupies quite a lot of space. They’re either stored in a cluttered drawer or take up much-needed table space. Yes, you can use hooks to hang them on walls or boards. However, with the Pro controller stand, you can put your controller on display.
This model is a single-part display stand for your Switch Pro controllers that features the Nintendo Switch logo. These let you store multiple controllers in a compact space.
You can print the stand in the standard Nintendo Switch colors of red and white, or you can use rainbow PLA to make it more vibrant.
- Who designed it? npiegdon
- How printable/popular is it? This stand has more than 2,000 likes, 67 makes, and over 30,000 downloads.
- Where to find it? Thingiverse
Button Auto-Clicker
In some video games, constantly clicking a button to grind some objects can be boring. With this project, you can make a button auto-clicker.
This is a fun project that includes electronics such as an Arduino as well as 3D printed parts. In short, you program a device to click a button repeatedly or at a set interval. You can find the case needed to house the electronics on Thingiverse.
For this clicker, you’ll need an Arduino Nano, a micro servo, and some wires. Alternatively, you can add a battery and switch to make the clicker wireless. Use this for games like Animal Crossing, where you can hook up this clicker to mass-produce fish bait.
- Who designed it? tinyboatproductions
- How printable/popular is it? This project has over 9,400 views with 12 likes on Instructables.
- Where to find it? Instructables
Grips
The Joy-Cons are fun and versatile controllers, but they’re not always comfortable to hold. This is no longer an issue with these 3D printed grips!
Comfort Grip
This is a Joy-Con grip mod project. The intention is to improve the console’s handheld comfort so that there are no hand cramps while playing for extended periods of time. To accomplish this, the creator has been upgrading the grip, resulting in many iterations to improve the ergonomics.
The grip also features a flat base that allows your Switch to stand upright, making it ideal for displaying. If you’re looking for a grip that fits the Nintendo Switch OLED model, there’s a separate file to download.
You’ll need to enable supports for this print. In addition, the creator recommends printing the grip standing up straight. The slot will be too narrow if printed facing down due to sagging.
- Who designed it? jgr526
- How printable/popular is it? This grip has been downloaded over 200,000 times, and there are over 10,000 likes and 155 successful makes.
- Where to find it? Thingiverse
Knuckles
These 3D printable knuckles are grip add-ons for your Joy-Con controllers. This Nintendo Switch accessory not only gives you an advantage in fighting games, it also provides a comfortable grip. Get ready to out-brawl your opponents with these DIY brass knuckle attachments for the Joy-Con controller.
This is an easy print that can be created without supports if desired. There’s also a design with supports to ensure a better fit for your knuckles. The print takes 2-3 hours to complete.
- Who designed it? Tokytome
- How printable/popular is it? The grip has been tested and printed rigorously by the maker for a good end result. It has around 8,000 downloads, 9 makes, and 4 remixes.
- Where to find it? Thingiverse
Replacement Nintendo Switch Grip
One of 16 winners in the Printables Replacement Parts contest from 2023, this model will allow you to use both your Joy-Cons together again should you ever lose your original Switch controller grip. These have been through several updates to improve printability, comfort, and longevity.
Tree supports are recommended for the best print quality possible, and some minor filing may need to be done around the grips to make them as smooth as possible. Again, this model will print just fine using PLA though PETG is recommended to keep the controllers from slipping after repeated use.
- Who designed it? Kaleb08
- How printable/popular is it? This model is gaining in popularity, with over 330 downloads along with 11 makes already posted.
- Where to find it? Printables
Strap-Storing
Combine your Joy-Cons into one comfortable whole with this mod, which allows you to play with both your Joy-Cons at the same time. In addition, all the components are in the same place, including the wrist straps, leading to less worry about losing individual pieces.
- Who designed it? Manabun_Lab
- How printable/popular is it? This is one of the most popular grips, with over 14,000 likes, 213,000 downloads, and 120 successful makes.
- Where to find it? Thingiverse
One-Hand Adapter
This is a Joy-Con adapter that allows you to interact with the Switch one-handed. The design also has a neat little toggle for the left bumper, and the backside has a Legend of Zelda motif. The maker developed this for a friend who could no longer use their right hand.
The adapter is ideal for people looking for one-handed Switch controllers. If you want to use your left hand, this grip mod is just perfect; otherwise, right-handed people can use the single-hand Joy-Con adapter. The printed model is lightweight and practical and should be a straightforward print.
- Who designed it? Vexelius
- How printable/popular is it? If you’re looking for single-handed controller mods for the Nintendo Switch, this is a great choice with close to 20,000 downloads, 246 likes, and 5 makes.
- Where to find it? Thingiverse
Switcherang
If you’re looking for a comfortable grip while playing at your table or desk, these DIY Joy-Con grips are perfect for your gaming needs. They provide an ergonomic grip right into your hands and can be stored in a travel case. This print is support-free and can be completed in 2-3 hours.
- Who designed it? MikeSalt
- How printable/popular is it? So far, this model has over 1,000 likes, 9,000 downloads, and 15 successful makes.
- Where to find it? Thingiverse
Vangard
The Joy-Con gets another retro vibe, bringing back the classic form factor of the Nintendo GameCube controller. This is a custom Joy-Con comfort grip, where the rails are tilted outward by 20 degrees to make the overall controller layout more similar to a standard controller.
It’s been separated out into three pieces to make printing and finishing easier. Some post-processing is required, but it shouldn’t represent that much of a challenge.
- Who designed it? EbonNebula
- How printable/popular is it? This unique “V” grip has 10 makes with over 12,000 downloads and 833 likes.
- Where to find it? Thingiverse
Single Joy-Con Grip
Beef up the standalone Joy-Con with a grip with handles, just like a proper joypad. This is a universal single Joy-Con grip, which accepts both left and right controllers. It also has room for the straps, allowing you to enjoy the nice shoulder buttons. In addition, the handles can provide you with a better grip and comfort.
There are a few other grips by the same maker, such as the double Joy-Con grip and portable comfort grip. You can print these with the maker’s print settings, which are 0.2-mm layer height and 13% infill, with raft and supports enabled.
- Who designed it? Halasox
- How printable/popular is it? With more than 14,000 downloads, this grip has 55 successful makes and 7 remixes.
- Where to find it? Thingiverse
Joy-Con Controller Holder
This is a basic Joy-Con holder that’s easy to snap on and off. The maker designed this controller with comfort in mind, and it delivers on that front.
Many makers in the community who have successfully printed this holder have praised its design, grip, and comfort. It’s a simple print that doesn’t require any supports. The maker printed this holder at a 0.25-mm layer height with 10% infill.
- Who designed it? 3DBotMaker
- How printable/popular is it? This model has 89 successful makes and over 66,000 downloads.
- Where to find it? Thingiverse
Joy-Con Drink Holder
We thought we’d end with something a bit less practical. After all, you’re going to need some refreshment for those long gaming sessions. Stash a can of soda in between your Joy-Cons to quench your thirst.
The design is pretty self-explanatory: It holds your drink and Joy-Cons in one tidy package. Just be aware that it’s a big item to print and could take a while, depending on your slicer settings. For a safe bet, you could try out the maker’s settings of a layer height of 0.25 mm and supports turned on.
- Who designed it? sanzliot
- How printable/popular is it? This mod has 40 makes, and the total number of downloads is closing in on 53,000.
- Where to find it? Thingiverse
License: The text of "The 40 Best Nintendo Switch 3D Prints in 2024" by All3DP is licensed under a Creative Commons Attribution 4.0 International License.