Featured image of 25 Greatest Legend of Zelda Props You Can 3D Print
Best of Hyrule

25 Greatest Legend of Zelda Props You Can 3D Print

Picture of Anatol Locker
by Anatol Locker
October 16, 2017

Looking for Legend of Zelda props? Here are the 25 greatest Legend of Zelda props you can 3D print. You can even get them 3D printed.

One of the most brilliant ideas of video game legend Shigeru Miyamoto is to reuse the props, enemies, and themes throughout all his games. Be it the Master Sword, the shield, bombs, and boomerangs, or even special items like the Ocarina of Time or Majora’s Mask, they all stick to our collective minds. Without further ado, here are the greatest The Legend of Zelda Props to 3D print.

1

Legend of Zelda Props Master Sword (Size 2)

Image of Legend of Zelda Props: Master Sword (Size 2)

What is it? It’s a smaller version of Link’s sword, which is more suited for cosplay. It is also easier to print and to assemble. As you might have guessed from the title, there’s another version, which is considerably bigger – not only to 3D print but also to wield.

Who made it? Lloyd Roberts did both versions of this 3D printed Zelda prop.

Where can I get it? Right here on MyMiniFactory.

2

Legend of Zelda Props Ocarina of Time

Image of Legend of Zelda Props: Ocarina of Time

What is it? The Ocarina of Time is a unique ocarina secretly handed down for generations by Hyrule’s Royal Family. You can now 3D print this working Zelda replica – just don‘t expect it to conjure up storms or alter the timeline.

If you want to learn to use this Zelda prop, try these finger guides at Smule.

Who made it? Maker hockenmaier based on a design by seggybob.

Where can I get it? Right here on Thingiverse.

3

Legend of Zelda Props Breath of the Wild Guardian Shield

Image of Legend of Zelda Props: Breath of the Wild Guardian Shield

What is it? This is the ultimate Zelda prop for “Breath of the Wild” fans. The shield is  700 mm wide and 600 mm tall. You also can use LED strips to really make it shine.

Who made it? It’s made by the Ruiz Brothers, experts in 3D modeling and video game props. It’s not a beginners project, as you not only need to print the Zelda shield, but also have to add some electronics to it.

Where can I get it? At Adafruit.

4

Legend of Zelda Props Goddess Chest

Image of Legend of Zelda Props: Goddess Chest

What is it? It‘s the Goddess Chest from “Skyward Sword”. The chest even plays the opening jingle as you open it (if you add the proper electronics, of course).

Who made it? Xeijix, an electrical engineer, specializing in software.

Where can I get it? Right here on Instructables. All the 3D print files for this Zelda prop are free.

5

Legend of Zelda Props Clawshot

Image of Legend of Zelda Props: Clawshot

What is it? One of the most beautiful Legend of Zelda props: The Clawshot (don’t mess it up with the hook shot). It’s an item first seen in Twilight Princess and Skyward Sword.

Who made it? A maker called TheKretchfoop. It‘s not an easy Zelda prop to make, but you should be able to 3D print and paint it in two days.

Where can I get it? Free for all on Thingiverse.

6

Legend of Zelda Props Majora’s Mask

Image of Legend of Zelda Props: Majora’s Mask

What is it? The mask which causes so much trouble “Majora’s Mask.” The Zelda prop mask is scaled to be wearable. It should be close to “lifesized”. It comes in two parts which you have to glue together.

Who made it? A guy by the moniker of ferreusveritas.

Where can I get it? You’ll get the designs for free at Thingiverse.

7

Legend of Zelda Props Fancy Triforce Pendant

Image of Legend of Zelda Props: Fancy Triforce Pendant

What is it? There’s a ton of 3d printable Triforce pendants out there. This one caught our eye as it’s an easy print and the embossed surface looks just right.

Who made it? Maker Cowkitty.

Where can I get it? Right here on Thingiverse.

8

Legend of Zelda Props Crest of Hyrule Mantlepiece

Image of Legend of Zelda Props: Crest of Hyrule Mantlepiece

What is it? According to the designer, this was “designed and printed for my friend’s birthday party as a trophy for a video game competition he is hosting.” What a nice gift this makes!

Who made it? Mr_MegaTronic.

Where can I get it? For free at Thingiverse.

9

Legend of Zelda Props Lullaby Ring

Image of Legend of Zelda Props: Lullaby Ring

What is it? A gold plated 3D printed ring. Quite cleverly, it contains the information on the button presses you need to play Zelda’s Lullaby. “Only Royal Family members are allowed to learn this song. Remember, it will help to prove your connection with the Royal Family.”

Who made it? Peregrine Studios. They also offer versions in stainless steel and bronze plated steel.

Where can I get it? You can buy it for €32.78 at Shapeways.

10

Legend of Zelda Props Complete Item Set

Image of Legend of Zelda Props: Complete Item Set

What is it? This is the big one: The full “The Legend of Zelda: Complete Item Set”. All these props could be found in the original first NES-Game.

Who made it? They were made by a shop called Hyrule Foundry. The Zelda props you see here are made from 3D printed sandstone. The price is steep: €349.74, but single items also can be ordered directly through Shapeways – just follow the link below. 

Where can I get it? Right here on Shapeways.

13

Legend of Zelda Props Breakable Pot Playset

Image of Legend of Zelda Props: Breakable Pot Playset

What is it? Have you ever thought about how many pots you’ve smashed while playing a Zelda game? Here‘s a 3D printed Zelda prop with a twist: If you hit it, it goes to pieces – and you might even find a rupee.

Who made it?  It‘s a fun piece from Chris Caplan. The pieces are held together with magnets. Just put a 3d printed rupee inside, then throw the pot!

Where can I get it?  At MyMiniFactory.

14

Legend of Zelda Props LOZ Rupees

Image of Legend of Zelda Props: LOZ Rupees

What is it? Rupees! The first few hours in the game, you can’t have enough of them to buy that shield or some bombs. Then you collect way too many and can’t find a good item to spend them on. As you nearing the final boss fight, you need them again for any potion you can grab.

Who made it?  There are many makes for 3D printed rupees. This one’s from AnsarumFor an authentic feel, 3D print them in Green, Blue, Yellow, Red, Purple, Orange, or Silver.

Where can I get it? Right here on Thingiverse.

15

Legend of Zelda Props Golden NES Cartridge

Image of Legend of Zelda Props: Golden NES Cartridge

What is it? It’s a replica of the famous golden cartridge of the original “The Legend of Zelda” NES-Game. If you’re into Zelda props, this should be on your 3D printing list.

Who made it?  A guy called Charizardtamer.

Where can I get it? We found this model on Tinkercad.

16

Legend of Zelda Props Boss Key

Image of Legend of Zelda Props: Boss Key

What is it? It’s the key to the boss room in any Zelda dungeon. No dungeon is complete without one. The design is loosely based on the design from Wind Waker and made in Tinkercad.

Who made it?  Maker Pawel Szymczykowski.

Where can I get it? At Thingiverse.

17

Legend of Zelda Props Ocarina of Time Hookshot

Image of Legend of Zelda Props: Ocarina of Time Hookshot

What is it? In the game, it’s a machine with a chain and a hook. If it latches onto certain objects, Link moves towards that object. Link can also use it to pull enemies and objects towards him.

Who made it?  CarryTheWhat after a design from Haycurt.

Where can I get it? At Thingiverse.

18

Legend of Zelda Props Boomerang

Image of Legend of Zelda Props: Boomerang

What is it? One of the most iconic items in the Hyrule universe. You’ll need it to collect rupees or stun monsters. Don’t leave home without it. This 3D printed version is 10 inches long.

Who made it?  Scott Fisher.

Where can I get it? We found this Zelda prop model here.

19

Legend of Zelda Props Bookends

Image of Legend of Zelda Props: Bookends

What is it? The “A Link Between Worlds” is the 17th game of the series. It came in 2013 for 3DS and received great ratings. It introduced a two-dimensional Link that could move on walls – which is depicted in these great looking 3D printed bookends.

Who made it?  Andy Bihlmaier.

Where can I get it? Right here on Thingiverse.

21

Legend of Zelda Props Deku Mask

Image of Legend of Zelda Props: Deku Mask

What is it? To 3D print this deku mask, you’ll need roughly 24 hours and a big spool of filament – but it’s really worth the wait. Don’t get too close to it or it might choose to disappear in the ground.

Who made it?  Benjamin Krygsheld did this piece. He also made a nice Mario mask.

Where can I get it? Here at MyMiniFactory.

22

Legend of Zelda Props Ocarina of Time Spiritual Stones

Image of Legend of Zelda Props: Ocarina of Time Spiritual Stones

What is it? Link needs these three Spiritual Stones (Kokiri’s Emerald, Goron’s Ruby, and Zora’s Sapphire) before he can travel through time.

Who made it? A maker called Dycus chose to make these pieces because “I couldn’t find any good models of the stones online anywhere – none of them looked accurate. These were ripped straight from the game with the 1964 emulator, the VRML plugin, and Blender. They were then cleaned up in Solidworks to fill in missing surfaces, knit them into a solid, and orient them to print well.”

Where can I get it? At Thingiverse.

23

Legend of Zelda Props Breath of the Wild Necklace

Image of Legend of Zelda Props: Breath of the Wild Necklace

What is it? If you’re into cosplay and the amazing “Breath of the Wild”, this is a thing to 3D print.

Who made it? Cosplayer Melizenn Nana designed it after the “Breath of the Wild” logo. The item is not complicated to 3D print, so all you have to do is to color the necklace.

Where can I get it? At MyMiniFactory.

24

Legend of Zelda Props Zelda-Inspired Joycon Holder

Image of Legend of Zelda Props: Zelda-Inspired Joycon Holder

What is it? This 3D printable Legend of Zelda item is a Joycon holder like the one that comes with the switch. There’s also an added lanyard holder.

Who made it? Brent Ed did this. He’s also got other interesting and fun joycon holders for free download.

Where can I get it? At MyMiniFactory.

25

Legend of Zelda Props Breath of the Wild Shrine

Image of Legend of Zelda Props: Breath of the Wild Shrine

What is it? These shrines are small “mini-dungeons” that can be found throughout the map of The Legend of Zelda: Breath of the Wild. There are 120 Shrines to locate and complete around the map. Each one is containing at least one Treasure Chest and Spirit Orb. So, visit these for goodies, treasure, and

Who made it? It’s made by maker Fotis Mint.

Where can I get it? At MyMiniFactory.

Recommended for you