Low-Cost Greatness

23 Amazing Raspberry Pi 3D Printer Projects

Raspberry Pi 3d printer

 A Raspberry Pi and a 3D printer are a match made in maker’s heaven. Here are some of the best Raspberry Pi 3D printer projects for you to build.

Got a Raspberry Pi? Need a good use case for your 3D printer? Then let us inspire you with some of the greatest Raspberry Pi 3D printer projects we could find.

Need a Raspberry Pi 3? Check price at AmazonAvailable at Amazon

Sure, you should have a bit of experience in soldering and building things. But even beginners can do some great Raspberry Pi 3D printing projects like a radio, a walkie-talkie or even a laptop.

By the way, if you don’t have a 3D printer, you can have the parts printed by a professional 3D printing service. To get the best price, please use All3DP’s price comparison service.

Raspberry Pi 3D Printer Project #1: Wearable Camera

Raspberry Pi 3D Printer Project #: Build a Wearable Camera

What is it? It’s a tiny wearable camera which you can program to take a continuous stream take time-lapse recordings. You’ll need a Raspberry Pi Zero and a weekend to build this gadget.

Difficulty: Easy.

More info atRaspberryPi.org


Raspberry Pi 3D Printer Project #2: Walkie Talkie

Raspberry Pi 3D Printer Project #: Build a Walkie-Talkie

What is it? It‘s a walkie-talkie which uses wifi to run the popular conferencing software Mumble. You can configure different groups, just like using different channels on a traditional walkie-talkie.The Talkiepi will require little to no maintenance to use. Just push the talk button and enjoy.

Difficulty: Easy. Print, solder some wires and have fun.

More info at: RaspberryPi.org

Raspberry Pi 3D Printer Project #3: Pirate Radio

Raspberry Pi 3D Printer Project #: Build a Radio

What is it? It’s a Raspberry Pi turned into a powerful FM transmitter. It has enough range to cover your home. You’ll need to run PiFM software, which is for free. To use it without risking a short circuit, you should 3D print a fitting case.

Difficulty: Easy. You should be done with it in half a day including 3D printing.

More info atMakezine. To choose a great Raspberry Pi case, please go here.

Raspberry Pi 3D Printer Project #4: Classic Mini NES

Raspberry Pi Mini NES

What is it? RetroPi turns your Raspberry Pi into a retro gaming console, which emulates most of the video game consoles from the 80ies and 90ies. The software is easy to install and tons of fun. All3DP has dedicated a whole article on the subject, which you can find here. You can choose from a dozen free Mini NES models to 3D print, so just pick the one you like.

Difficulty: Easy: Print, install, play.

More infoRight here.

Raspberry Pi 3D Printer Project #5: Robot

ōRaspberry Pi 3D Printer Project #: Build a Robot

What is it? The 3D printed replica of a robot from the classic “Ghost In The Shell”. This T08A2 / R3000 spider tank is powered by a RaspberryPi and can be controlled with a PlayStation controller.

Difficulty: Difficult.

More info atWevolver.

Raspberry Pi 3D Printer Project #6: Laptop

Raspberry Pi 3D Printer Project #: Build a Laptop

What is it? The guys from Pi-Top have come up with some great ideas: Why not build a laptop (“Pi-top”) and a desktop PC (“Pi-top CEED”) from a Raspberry Pi and a 3D printer? They had two successful crowdfunding campaigns. Now they offer the bundled components, while you do the printing and assembly. A great project for schools, also.

Difficulty: Medium.

More info atPi-top.


Raspberry Pi 3D Printer Project #7: Pip-Boy

Raspberry Pi 3D Printer Project #: Build a Pip-Boy

What is it? This is the ultimate accessory for any Fallout fan. The original 3D printed Pip-Boy was made for use with smartphones only. The fan version from maker Yvo de Haas can be adapted to Raspberry Pi also. 3D printing and assembly is quite a thing, so better choose this one if you have some experience in the Wasteland.

Difficulty: Difficult.

More info at: This article.

Raspberry Pi 3D Printer Project #8: Google Glass

Raspberry Pi 3D Printer Project #: Build Google Glass

What is it? This free design easily clips to your prescription glasses. You then can display any kind of device with composite video – like a Raspberry Pi. You need some parts which will set you back about $100.

Difficulty: Medium.

More info atAdafruit. The files are free at Thingiverse.

Raspberry Pi 3D Printer Project #9: Pokemon Finder

Raspberry Pi 3D Printer Project #: Build a Pokemon finder

What is it? At the peak of the Pokemon Go craze, the Ruiz Brothers came up with a great idea. They built a Raspberry Pi Zero-based sniffer that helped you find rare Pokemon. It also showed common, rare and legendary Pokemon you could catch. The case could be 3D printed.

Difficulty: Medium

More info atAdafruit.

Raspberry Pi 3D Printer Project #10: Security Camera

Raspberry Pi 3D Printer Project #: Build a Security Camera

What is it?  Most Makers have all the stuff laying around to build a 3D printed surveillance camera – they just need the proper case files. Instructables user tlankford, who lives on his sustainable farm, is working on some exciting projects like from anti-poaching drones and greenhouse automation, designed a security camera for 3D printing.

Difficulty: Easy.

More info atInstructables.

Raspberry Pi 3D Printer Project #11: Desktop PC

Raspberry Pi 3D Printer Project #: Build a Desktop PC

What is it? The cost of this 10″ 3D printed desktop Raspberry Pi goes over low-budget DIY projects, but it’s meant to be premium build. A dedicated Linux box with a decent sized screen could cost about the same. You can mount it to anything and design custom brackets to adjust it in any configuration. Pretty cool. Did we mention it runs on rechargeable battery packs?

Difficulty: Medium.

More info atAdafruit.

Raspberry Pi 3D Printer Project #12: Skycam

Raspberry Pi 3D Printer Project #: Build a Skycam

What is it? It’s a bird! It’s a plane! Nah, it’s a 3D printed Skycam. It rides a monorail of string, streams video, and is remote-controlled from a smartphone.

Difficulty: Medium.

More info atMake.

Raspberry Pi 3D Printer Project #13: 3D Scanner

Raspberry Pi 3D Printer Project #: Build a 3D Scanner

What is it? It‘s a full-body scanner, made from 12 Pis, 12 Pi cameras, 12 SD cards. It lets you scan any object or person in an instant.

Difficulty: Difficult. The built itself is not utterly complicated, but you have print and assemble a lot of pieces.

More info atInstructables.

Raspberry Pi 3D Printer Project #14: Telescope

Raspberry Pi 3D Printer Project #: Build a Telescope

What is it? The “PiKon” is a classic from 2014. This 3D printed Newtonian reflecting telescope uses Raspberry Pi camera sensors to pick up the light. It has a magnification factor of about 120X  – enough to get a close look at the moon.

Difficulty: Medium, if you want to build it yourself from scratch. You can get a kit which makes things a lot easier.

More info atMake.

Raspberry Pi 3D Printer Project #15: Game Boy

bildschirmfoto-2016-02-18-um-14-09-04

What is it? Wait… is that a regular Game Boy? Not quite, it’s PiGRRL 2, the successor of the popular PiGRRL. It has a bigger screen, a better buttons layout, is easier to build and has several other improvements. You’ll love it.

Difficulty: Medium.

More info at: Thingiverse for the files; instructions at Adafruit.

Raspberry Pi 3D Printer Project #16: Dashboard Navigation 

Raspberry Pi 3D Printer Project

What is it? Gregory Holloway had already done some Raspberry Pi projects before he started with this in-car navigation of his old Suzuki. All the dashboard parts were 3D printed and were stored in the passenger airbag compartment. He also uses a small wireless keyboard to type in his destination.

Difficulty: Difficult.

More info at: Instructables.

Raspberry Pi 3D Printer Project #17: Developer’s Case

Raspberry Pi 3D Printer Project

What is it? If you are into electronics, Arduino and Raspberry Pi are the boards to go to. This Raspberry Pi 3D Printer Project “CustoBlocks” lets you have the perfect cases for your electronics. The cases are modular, can be connected to each other and can also house breadboards. With this, you don‘t have to worry about short-circuiting your Raspberry Pi anymore.

Difficulty: Easy.

More info at: Instructables.

Raspberry Pi 3D Printer Project #18: Robot Tank

What is it? The “MR-4” tank was designed and built by Thingiverse user Timmi Clark. Its brain consists of a Raspberry Pi, most of the parts were 3D printed. It also uses Arduino and several servos, of course.

Difficulty: Difficult.

More info at: Thingiverse.

Raspberry Pi 3D Printer Project #19: Server Farm

Raspberry Pi 3d printer project

What is it? Like with real pie, you can’t get enough Raspberry Pi. With this 3D printed case and frame, you can build your little computer cluster. The cases are stackable and easy to print.

Difficulty: Easy.

More info at: Thingiverse.

Raspberry Pi 3D Printer Project #20: Smart Clock

Raspberry Pi 3D printer Zero Clock

What is it? Isn’t a Raspberry Pi Zero a bit overkill for a clock? Yep, but with the internet, you can do so much more. Want some examples? Program the Raspberry Pi Zero to automatically adjust to time zones based on the IP address. Track your latest Amazon order. Let it remind if the way to work is crowded. There are so many things this clock can help you with.

Difficulty: Easy.

More info at: Thingiverse.

Raspberry Pi 3D Printer Project #21: Smart Glasses

What is it? The Google Glass project may have come to an end, yet you can 3D print your own smart video lenses. The design allows you to clip the screen on regular glasses. It’s not at all complicated, and also a really cool use for your Raspberry Pi. 

Difficulty: Medium, if you know how to solder and build electronics.

More info atAdafruit.

Raspberry Pi 3D Printer Project #22: An Internet-of-Things Printer

What is it? This thermal printer is connected directly to the internet. You can have a daily weather forecast ready before you head out in the morning, a puzzle to work on while riding the subway, provide a list of “tweets” relating to your interests… or any other task you can program! 

Difficulty: Expert, but it’s beautifully explained in the instructions. 

More info atAdafruit.

Raspberry Pi 3D Printer Project #23: Octoprint

What is it? Octoprint isn’t something to be 3D printed – it’s a great improvement for your 3D printer. With Octoprint installed on your Raspberry Pi, you can monitor your prints and temperatures, embed a webcam feed, consult an integrated GCODE and a lot more.

Difficulty: Easy.

More info atOctoprint.

Did we miss any great Raspberry Pi 3D printer projects? Please feel free to add to the comments!