Featured image of 3D Printed Stranger Things – 10 Models from the Upside Down
Stranger (3D Printed) Things

3D Printed Stranger Things – 10 Models from the Upside Down

Picture of Eldon Burr
by Eldon Burr
Jul 15, 2019
Advertisement
Advertisement
Advertisement

Stranger Things is in its third season: Time to take a look at some wicked 3D printed Stranger Things models sure to get your skin crawling!

3D Printed Stranger Things Time To Print

This Stranger Things would look great almost anywhere.
This Stranger Things would look great almost anywhere. Source: Ryan1705 / Thingiverse

If you’re a fan of the Netflix series Stranger Things you probably have already binge-watched all of season three by now. If you’re a 3D printing enthusiast, you might be thinking about printing a Stranger Things related print and wondering if there are any good ones out there. Luckily, we’ve done the work for you. Let’s check out the coolest prints we found from the hit show’s universe.

Advertisement
1

3D Printed Stranger Things Lithophane Poster

This was modeled after a
This was modeled after a "The Thing"-inspired fan-made Stranger Things poster. Source: JaycenS / Thingiverse

This Stranger Things Lithophane poster is sure to grab people’s attention. We think it looks amazing, but, as sci-fi and horror nerds, we also dig the nod to John Carpenter’s “The Thing”. If you like it as much as we do, you’re probably already breaking out the filament!

Creator: Thingiverse user JaycenS

Who printed it? One Thingiverse user (and the creator)

Where to get it? Thingiverse

Advertisement
2

3D Printed Stranger Things Starcourt Mall Sign

This Starcourt Mall Sign is just like the one in the show right down to the rad colors!
This Starcourt Mall Sign is just like the one in the show right down to the rad colors! Source: spidermurph / Thingiverse

This is the sign from the Starcourt Mall in season three. If you’re a fan of 80s nostalgia or Stranger Things, you’ve got to appreciate the work both the designers on the show and this maker put into this sign. They even used brightly colored filaments to re-create that super cool 80s feel.

Creator: Thingiverse user spidermurph

Who printed it? This one’s so new that nobody has made it yet other than the creator.

Where to get it? Thingiverse

Advertisement
3

3D Printed Stranger Things

The creator had to trace the custom
The creator had to trace the custom "3" to create this Season 3 Logo Source: pneumotoxin / Thingiverse

This is another logo specifically for season three. We think this is such a nice sign it’s just begging to be printed alongside any season three prints you might create in the future. The creator actually took the time to trace the number three and said on Thingiverse that “all that time was worth it.” We agree.

Creator: Thingiverse user pneumotoxin

Who printed it? Thus far, only the creator has made this.

Where to get it? Thingiverse

Advertisement
4

3D Printed Stranger Things The Dreaded Demogorgon

The Dreaded Demogorgon pictured is pretty slick considering it was modeled with a free modeling software.
The Dreaded Demogorgon pictured is pretty slick considering it was modeled with a free modeling software. Source: xEliteAnubisx / Thingiverse

Perhaps the most obvious monster to print from the Stranger Things universe is the Demogorgon. Modeled in Sculptris, it looks just like the one on the show. We’re impressed at the quality considering Sculptris is freeware.

Creator: Thingiverse user xEliteAnubisx

Who printed it? Three Thingiverse users have successfully printed this.

Where to get it? Thingiverse

Advertisement
5

3D Printed Stranger Things Key-Chain

Nothing says you're a fan like a custom Stranger Things key chain.
Nothing says you're a fan like a custom Stranger Things key chain. Source: thecoolio2 / Thingiverse

If you’re looking for something a little more handy, this nifty key-chain is a simple, but stylish print. As a bonus, it gives you a “low-key” way to show your love for your favorite show.

Creator: Thingiverse user thecoolio2

Who printed it? One Thingiverse user has printed this.

Where to get it? Thingiverse

Advertisement
6

3D Printed Stranger Things Pollywog/Dart

Pollywog From
Pollywog From "Stranger Things" looks just as creepy as on the show! Source: pyanfar / Thingiverse

The Pollywog/Dart is another cool little print from xEliteAnubisx at Thingiverse. It is basically a baby Demogorgon, so it should make a great companion to your Demogorgon print.

Creator: Thingiverse user xEliteAnubisx

Who printed it? 7 Thingiverse users have successfully printed this.

Where to get it? Thingiverse

Advertisement
7

3D Printed Stranger Things Miniatures

Stranger Miniatures are part of a line of miniatures.
Stranger Miniatures are part of a line of miniatures. Source: purakito / Cults

If you want some cute miniatures of the cast of Stranger Things, this is the print for you. These little figurines are sure to add some style to your Stranger Things print collection.

Creator: Thingiverse user purakito

Who printed it? Six Thingiverse users have successfully printed this.

Where to get it? Thingiverse

Advertisement
8

3D Printed Stranger Things The Mind-Flayer

Mind-Flayer From Season one.
Mind-Flayer From Season one. Source: Cavedog / MyMiniFactory

The Mind-Flayer comes back for the third season, so we must include it here. This odd beast is a more difficult print to achieve, according to the author, so be ready for a challenge.

Creator: Thingiverse user Cavedog

Who printed it? One Thingiverse user has successfully printed this.

Where to get it? Thingiverse

Advertisement
9

3D Printed Stranger Things Book Stop

This Stranger Things Book Stop was a difficult print to clean up.
This Stranger Things Book Stop was a difficult print to clean up. Source: draftking / Thingiverse

This book stop looks great and would compliment any bookshelf of a science fiction or horror fan. The one user that made it reported it was very difficult to clean up the print, so don’t make it too small!

Creator:  Thingiverse user Peazuz

Who printed it? One Thingiverse User

Where to get it? Thingiverse

Advertisement
10

3D Printed Stranger Things Hawkins Research Lab Key-chain

This neat keychain was made with glow in the dark filament.
This neat keychain was made with glow in the dark filament. Source: MrFairbanks / Thingiverse

This is another neat key-chain. This one is made by a middle school teacher who even gave a few to his students. We salute Mr. Fairbanks for being so cool and introducing his students to 3D printing! He included two versions, one in two pieces that requires no supports, and a one-piece version that does.

Creator:  Thingiverse user MrFairbanks

Who printed it? Only the creator has made this one so far.

Where to get it? Thingiverse

Feature image source: Netflix

License: The text of "3D Printed Stranger Things – 10 Models from the Upside Down" by All3DP is licensed under a Creative Commons Attribution 4.0 International License.

Subscribe to updates from All3DP

You are subscribed to updates from All3DP

You can’t subscribe to updates from All3DP. Learn more… Subscribe

You can’t subscribe to updates from All3DP. Learn more…

Advertisement

Recommended for you

Advertisement
Advertisement
Advertisement