Clogged nozzles are painful. Read on to find out what exactly makes 3D printer cleaning filament special, and how to use it!
A nozzle clog is when an FDM 3D printer‘s nozzle is partially or totally blocked, preventing smooth extrusion and leading to print (or even machine) failures. To fix them, people have come up with scores of techniques, from using acupuncture needles to clear the nozzle to hot and cold pulls.
But with all these techniques being so inexpensive, where does dedicated “cleaning filament” fit in?
Here, we’ll take a look at what cleaning filament is, its advantages and disadvantages, and how to use it. Let’s get started!
Cleaning filament is an FDM material made specifically for nozzle cleaning. Usually sold in short sticks or coils, this stuff is useful for whenever you have a nozzle clog you need to bust.
At first sight, these filaments may just seem like overpriced repackagings of the nylon filaments commonly used for other nozzle-cleaning methods. Don’t be fooled. Usually, cleaning filaments are actually purging materials more typically used for cleaning out industrial injection-molding equipment. They help cleanly push out stuck particles and carbonized plastic without damaging your nozzle. In many cases, cleaning filaments are actually more thorough and efficient in their cleaning than traditional hot and cold pulls.
So, how do you use this seemingly magical material? As it turns out, it’s rather simple.
To use cleaning filament, you must first decide if it’s really the best approach for your clog. Cleaning filament only works with partial clogs, as it requires that the filament can still extrude. For full clogs, you may have to perform some hot or cold pulls, or break up the blockage with a needle before proceeding.
If you’re ready to continue, remove the Bowden tube that may be attached to your printer’s print head. Heat the nozzle up to the last temperature at which you were printing, and either manually feed the cleaning filament through (on Bowden systems) or set the printer to extrude automatically (on direct-drive systems). You should see the old filament getting pushed out and the cleaning filament coming out of the nozzle (pictured above). Keep extruding until no black specks or residue comes out with the cleaning filament.
That’s it! Once you’re done, just unload the cleaning filament and continue printing with your usual filament!
License: The text of "3D Printer Cleaning Filament: What You Need to Know" by All3DP is licensed under a Creative Commons Attribution 4.0 International License.
Subscribe to updates from All3DP
You are subscribed to updates from All3DP
You can’t subscribe to updates from All3DP. Learn more…