Featured image of 40 Epic Star Wars Models to 3D Print
From AT-AT to Yoda

40 Epic Star Wars Models to 3D Print

Picture of Franklin Houser
by Franklin Houser
October 4, 2017

A Yoda for your desk? A laser sword pen holder? Or a battery powered walking AT-AT? Check out these epic Star Wars models to 3D print.

Looking for a new model of Darth Vader or a walking AT-AT? With a new Star Wars Episode just around the corner – well, in December – it’s time to get hyped. What better way to do that than to 3D print Star Wars props? Or get them printed using All3DP’s Best Price 3D Printing Service. Following is a list of awesome Star Wars models to 3D print.

Printing Button

1

Star Wars Models to 3D Print TIE Fighter

Image of Star Wars Models to 3D Print: TIE Fighter

Printing Button

What is it? It’s a Tie Fighter, a 3D printed Tie Fighter. The designer modeled it from memory, which is pretty impressive because it looks really good. This Star Wars model either comes as one single STL file or as two halves.

Force Factor: Don’t spin out of control.

Who made it? AssertiveWall

Where to get this Star Wars model? Free from Thingiverse.

2

Star Wars Models to 3D Print 3D Printed X-Wing Starfighter

Image of Star Wars Models to 3D Print: 3D Printed X-Wing Starfighter

What is it? A 3D printed X-Wing Starfighter sometimes used to blow up Death Stars, sometimes it needs to be rescued from a swamp. This Star Wars model has closed wings and is sliced down the middle of the wings. This way, the Starfighter can be printed vertically, making the process a lot easier given the fragile laser cannons at the tips of the wings.

Force Factor: There’s no better way to get to Dagobah.

Where to get this Star Wars model? Free from Thingiverse.

3

Star Wars Models to 3D Print Thermal Detonator

Image of Star Wars Models to 3D Print: Thermal Detonator

What is it? This thermal detonator from Star Wars can be 3D printed. The model has four holes for LED lights making it possible to bring this prop to life. The creator even has instructions on how to program an Arduino controller for the LEDs.

Force Factor: Used extensively throughout the Star Wars world.

Where to get this Star Wars model? Free from Thingiverse.

4

Star Wars Models to 3D Print Darth Vader Head

Image of Star Wars Models to 3D Print: Darth Vader Head

What is it? It’s the head of Darth Vader – 3D printed of course. This could be a cool prop for any desktop. Best to print this Star Wars model in black, of course, and polish it.

Force Factor: It’s Darth Vader. ’Nuff said.

Where to get this Star Wars model? Free from Thingiverse.

5

Star Wars Models to 3D Print Star Wars Keychain

Image of Star Wars Models to 3D Print: Star Wars Keychain

What is it? It’s a 3D printed Star Wars key chain. One of these belongs with the keys of every true fan. One of these printed in black and yellow would be cool.

Force Factor: Geek status obtained.

Where to get this Star Wars model? Free from Thingiverse.

6

Star Wars Models to 3D Print Lightsaber Pencil Top

Image of Star Wars Models to 3D Print: Lightsaber Pencil Top

Printing Button

What is it? A 3D printed pencil extension in the shape of a lightsaber handle. This is one of those must have items for those impromptu lightsaber battles.

Force Factor: Wield a lightsaber.

Who made it? Tarek Mustafa

Where to get this Star Wars model? Free from Thingiverse.

7

Star Wars Models to 3D Print Jabba The Hutt

Image of Star Wars Models to 3D Print: Jabba The Hutt

Printing Button

What is it? The late Jabba the Hutt in 3D printed form. Why go to Tatooine when you could summon Jabba the Hutt through your 3D printer?

Force Factor: He won’t be getting his payment from Han Solo.

Who made it? John Bryant

Where to get this Star Wars model? Free from Thingiverse.

9

Star Wars Models to 3D Print Luke Skywalker Lightsaber

Image of Star Wars Models to 3D Print: Luke Skywalker Lightsaber

What is it? It’s Luke Skywalker’s lightsaber and it’s 3D printed. This Star Wars model consists of eight individual parts. The creator advises to remove any excess support material left over from the print and to glue the pieces together with hot glue.

Force Factor: “I see you have constructed a new lightsaber. Your skills are complete. Indeed you are powerful, as the Emperor has foreseen.”
―Darth Vader

Where to get this Star Wars model? Free from Thingiverse.

10

Star Wars Models to 3D Print Low Poly Yoda

Image of Star Wars Models to 3D Print: Low Poly Yoda

What is it? It’s a 3D printed bust of Yoda. The low poly design actually fits this character quite well. The 3D print should take about seven hours using PLA at 100 microns and 20% infill. Patience you must have, young Padawan!

Force Factor: It’s Yoda.

Where to get this Star Wars model? Free from Pinshape.

11

Star Wars Models to 3D Print Large R2-D2

Image of Star Wars Models to 3D Print: Large R2-D2

What is it? This is an excellent remake of an R2-D2 Astromech Droid. But R2-D2 is white isn’t he? Well, the Star Wars model in the picture doesn’t represent the R2-D2 from the films. A replica could just as easily be printed using a different color.

Force Factor: Make sure to store any Death Star plans inside an R2-D2 droid.

Where to get this Star Wars model? Free from Thingiverse.

13

Star Wars Models to 3D Print Episode 7 Stormtrooper Helmet

Image of Star Wars Models to 3D Print: Episode 7 Stormtrooper Helmet

Printing Button

What is it? A 3D printed Stormtrooper Helmet from Episode VII. There’s almost no need to paint this helmet if it is printed using white filament.

Force Factor: Maybe Stormtroopers would have better aim without these.

Who made it? Jason McLachlan

Where to get this Star Wars model? Free from Thingiverse.

14

Star Wars Models to 3D Print Motorized AT-AT

Image of Star Wars Models to 3D Print: Motorized AT-AT

Printing Button

What is it? It’s a 3D printed AT-AT that can walk around. How cool is that? This piece of clockwork has 69 pieces in total, is powered by a 9V battery, and is driven by a 90 rpm motor. The finished Walker is about one foot tall. Read the Thingiverse page for details about the non-3D printed components.

Force Factor: These beasts can be deployed just about anywhere. (Battle of Hoth)

Who made it? Dan Olson

Where to get this Star Wars model? Free from Thingiverse.

15

Star Wars Models to 3D Print BB-8

Image of Star Wars Models to 3D Print: BB-8

What is it? This is a 3D printed version of BB-8, the rolling droid from Star Wars Episode VII. This model BB-8 is intended to be used with a Sphero. A Sphero is an app controlled robot ball that can travel up to 7 ft per second. Put it inside your 3D printed BB-8 and you’ve got yourself a real droid.

Force Factor: Thumbs up to this little guy.

Where to get this Star Wars model? Free from Thingiverse.

16

Star Wars Models to 3D Print Star Wars Book End

Image of Star Wars Models to 3D Print: Star Wars Book End

Printing Button

What is it? It’s a Star Wars themed 3D printed book end. This Star Wars model is a must have for every true fan.

Force Factor: The Star Trooper Book end doesn’t need to be touching the books to keep them upright.

Who made it? Matt Fritz

Where to get this Star Wars model? Free from Thingiverse.

17

Star Wars Models to 3D Print Millenium Falcon

Image of Star Wars Models to 3D Print: Millenium Falcon

What is it? It’s a 3D printed Millenium Falcon. This is a fairly large model that prints standing up on its back, i.e. where the engines are. It is recommended to try printing this Star Wars model with a slightly larger raft to keep it from tipping during the print. A good alternative to that expensive Lego set.

Force Factor: It’s the Millenium Falcon.

Where to get this Star Wars model? Free from Thingiverse.

18

Star Wars Models to 3D Print Imperial Shuttle

Image of Star Wars Models to 3D Print: Imperial Shuttle

What is it? It’s a 3D printed Imperial Shuttle. The wings on this Star Wars model are hinged, so the wings can be moved up and down. It is recommended to print this model with at least 3% infill and with three shells. If you ever need to sneak into an Imperial base, this is the ship to use.

Force Factor: Don’t forget the clearance codes.

Where to get this Star Wars model? Free from Thingiverse.

19

Star Wars Models to 3D Print Low Poly Darth Vader

Image of Star Wars Models to 3D Print: Low Poly Darth Vader

What is it? It’s a low poly model of Darth Vader. Agustin Flowalistik, the designer of this, model did a really good job on this!

Force Factor: “The Emperor is not as forgiving as I am.” ―Darth Vader

Where to get this Star Wars model? Free from Thingiverse.

20

Star Wars Models to 3D Print Low Poly Stormtrooper

Image of Star Wars Models to 3D Print: Low Poly Stormtrooper

What is it? It’s a 3D printed low poly Stormtrooper. Luckily, this Stormtrooper doesn’t have his blaster equipped. Who knows where he might shoot. This Star Wars model should print in less than two hours using PLA at 200 microns.

Force Factor: Go to target practice!

Where to get this Star Wars model? Free from Thingiverse.

21

Star Wars Models to 3D Print AT-ST Scout Walker

Image of Star Wars Models to 3D Print: AT-ST Scout Walker

Printing Button

What is it? This is a 3D printed AT-ST Scout Walker. At 18 STL files, with some of them needing to be printed twice, this model is not exactly a simple one. The creator says there are alignment holes in some of the parts. Little pieces of filament are intended to be used with these holes before gluing the parts together.

Force Factor: Not Ewok-proof.

Who made it? Maak Mijn Idee

Where to get this Star Wars model? Free from Thingiverse.

22

Star Wars Models to 3D Print Han Solo Blaster

Image of Star Wars Models to 3D Print: Han Solo Blaster

What is it? This blaster, known as the DL-44 blaster pistol is 3D printed. Han Solo used one of these pistols in the Star Wars films. It is suggested to print this Star Wars model with 10% infill at 200 microns.

Force Factor: Han shot first.

Where to get this Star Wars model? Free from Thingiverse.

23

Star Wars Models to 3D Print Low Poly C-3PO and R2-D2

Image of Star Wars Models to 3D Print: Low Poly C-3PO and R2-D2

What is it? These are low poly 3D printed models of C-3PO and R2-D2. These low poly models don’t require supports to be 3D printed. The models consist of a small number of parts and connector pegs.

Force Factor: “It was all Artoo’s fault.” ―C-3PO

Where to get this Star Wars model? Free from Thingiverse.

25

Star Wars Models to 3D Print Han Solo in Carbonite

Image of Star Wars Models to 3D Print: Han Solo in Carbonite

What is it? It’s 3D printed Han Solo in carbonite. This one is especially cool. Maybe print it with carbon infused filament for extra cool factor. This time, there’s no way Han Solo can get out of this bind.

Force Factor: Jabba’s prized possession

Where to get this Star Wars model? Free from Thingiverse.

26

Star Wars Models to 3D Print R2-D2 Egg Cup

Image of Star Wars Models to 3D Print: R2-D2 Egg Cup

Printing Button

What is it? It’s a 3D printed egg cup in the shape of R2-D2. Thanks to R2-D2’s convenient form, this is actually possible and it looks cool. This is the egg cup every true fan should have.

Force Factor: With all of R2-D2’s capabilities, maybe he can cook an egg as well.

Who made it? drmax

Where to get this Star Wars model? Free from Thingiverse.

27

Star Wars Models to 3D Print Death Star Birdhouse

Image of Star Wars Models to 3D Print: Death Star Birdhouse

Printing Button

What is it? This is a 3D printed Death Star birdhouse. The files print out a sphere that is 100 mm in diameter. However, the creator mentions that this Star Wars model can be scaled to whatever size needed, noting that the Death Star is 160 km in diameter. Files for the crater are also available if needed.

Force Factor: Small moon.

Who made it? plainolddave

Where to get this Star Wars model? Free from Thingiverse.

28

Star Wars Models to 3D Print Lightsaber Stand

Image of Star Wars Models to 3D Print: Lightsaber Stand

Printing Button

What is it? This Star Wars model is a lightsaber stand. Have lots of lightsaber? If, yes then look no further. There are lots of STL files with different name plates for the different Star wars characters. The stands can also be lit up with LED lights.

Force Factor: General Grievous wouldn’t have to carry all his lightsabers with him all the time if he had some of these.

Who made it? Jesse Smith

Where to get this Star Wars model? Free from Thingiverse.

29

Star Wars Models to 3D Print Star Wars Light Switch Plate

Image of Star Wars Models to 3D Print: Star Wars Light Switch Plate

What is it? It’s a 3D printed light switch with “JEDI” and “SITH” labels for the on/off positions. Every true fan needs one of these for their Star Wars memorabilia room.

Force Factor: Super Geek.

Where to get this Star Wars model? Free from Thingiverse.

30

Star Wars Models to 3D Print K-2SO

Image of Star Wars Models to 3D Print: K-2SO

Printing Button

What is it? This is a 3D printable model of the K-2SO robot seen in Rogue One. This is the witty robot, who sacrificed his existence and saved the day for the success of the mission to steal the Death Star plans.

Force Factor: “Locking the vault door now. Goodbye.”―K-2SO

Who made it? Raphael Gatt

Where to get this Star Wars model? Free from Thingiverse.

31

Star Wars Models to 3D Print U-Wing Fan Design

Image of Star Wars Models to 3D Print: U-Wing Fan Design

What is it? This is a fan designed 3D printable model of the U-Wing Starfighter/support craft from the Rogue One film.

Force Factor: These starfighters were used during the Battle of Scarif.

Where to get this Star Wars model? Free from Thingiverse.

32

Star Wars Models to 3D Print Darth Vader Melted Mask

Image of Star Wars Models to 3D Print: Darth Vader Melted Mask

Printing Button

What is it? This is a 3D printable version of the deformed Darth Vader mask seen in Episode VII. This Star Wars model was created by editing an existing model of Darth Vader’s mask.

Force Factor: Kylo Ren’s prized possession.

Who made it? Rob Peters

Where to get this Star Wars model? Free from Thingiverse.

33

Star Wars Models to 3D Print Star Wars iPhone 6 Case

Image of Star Wars Models to 3D Print: Star Wars iPhone 6 Case

Printing Button

What is it? This is a 3D printable smartphone case for the iPhone 6. It is suggested to print this Star Wars model with a thin layer height so that the thinnest part of the back of the case consists of more than one layer.

Force Factor: Use the Force to keep your phone from hitting the floor.

Who made it? Anton Sombetzki

Where to get this Star Wars model? Free from Thingiverse.

34

Star Wars Models to 3D Print Star Wars Snowflakes

Image of Star Wars Models to 3D Print: Star Wars Snowflakes

Printing Button

What is it? These are some really cool Star Wars themed snowflakes. Anthony Herrera has done a really good job on the designs. Go check his out website. Aaron Roberts, a Thingiverse user, came along and turned the snowflake designs into 3D printable STL files. The files include Boba Fett, R2-D2, TIE Interceptors, and many more.

Force Factor: So this is what the snowflakes look like on Hoth.

Who made it? Aaron Roberts

Where to get this Star Wars model? Free from Thingiverse.

35

Star Wars Models to 3D Print Star Wars Spinners

Image of Star Wars Models to 3D Print: Star Wars Spinners

Printing Button

What is it? Star Wars themed fidget spinners, everyone! These were designed using the Star Wars snowflake models. There’s a good selection of fidget spinner STL files including Stormtroopers, Darth Vader, Kylo Ren, BB-8, Yoda, X-Wings, C-3PO, and many more. The fidget spinners are either two-spoked or three-spoked.

Force Factor: May the fidget spinner be with you.

Who made it? Scott Rose

Where to get this Star Wars model? Free from Thingiverse.

36

Star Wars Models to 3D Print AT-TE Walker

Image of Star Wars Models to 3D Print: AT-TE Walker

What is it? The AT-TE walkers were “used by the galactic Republic during the Clone Wars”, as described in the Wookieepedia article. This Star Wars model has a moving cannon and legs.

Force Factor: Captain Rex’s house.

Where to get this Star Wars model? Free from Thingiverse.

37

Star Wars Models to 3D Print Captain Phasma Helmet

Image of Star Wars Models to 3D Print: Captain Phasma Helmet

What is it? This is a 3D printable model of Captain Phasmas Helmet. The model consists of 14 STL files, so this won’t be the quickest or simplest 3D printing project out there, especially if that shiny silver finish is the desired outcome.

Force Factor: Brienne of Tarth’s double life.

Where to get this Star Wars model? Free from Thingiverse.

38

Star Wars Models to 3D Print Rey's Speeder Bike Quadcopter

Image of Star Wars Models to 3D Print: Rey's Speeder Bike Quadcopter

What is it? This is a 3D printed quadcopter version of Rey’s Speeder Bike. Rey built this speeder by herself from scrap parts. The photo does not show Rey sitting on the speed. This is because the figure is not included in the STL files. A separate figure, to sit on the speeder, will have to be found.

Force Factor: Rey must be an aerospace engineer!

Where to get this Star Wars model? Free from Thingiverse.

39

Star Wars Models to 3D Print Star Wars - Dark Holocron

Image of Star Wars Models to 3D Print: Star Wars - Dark Holocron

What is it? This is a 3D printable model of a Sith Holocron. Hidden Sith markings become visible, when the Holocron is lit from the inside. This Star Wars model was printed on a Dremel Idea Builder at 200 microns.

Force Factor: Ezra Bridger knows too much.

Where to get this Star Wars model? Free from Thingiverse.

40

Star Wars Models to 3D Print Death Star

Image of Star Wars Models to 3D Print: Death Star

What is it? This is a 3D printed Death Star. This model is actually pretty cool. The cool effect of having all the floors look real is achieved by 3D printing lots of individual discs before piecing them all together to create this awesome model. However, this Star Wars model is not free and must be purchased before the files can be downloaded.

Force Factor: Fully detailed and miniaturized.

Price: $6.50

Where to get this Star Wars model? For sale at Pinshape.

Disclaimer:

All3DP GmbH makes 3D printing available to everyone.

If you choose to buy an item through one of All3DP’s articles, we do not charge any fee or additional price on top of our partners fulfillment price. We are paid on a commission, which means that we receive a small percentage from our partners.

Also, we are not selling the models. By comparing the prices of our 3D printing services, we simply are pointing you to the lowest 3D printing price available. If you would like to know more, please visit our Terms of Service.

Also, the editorial team of All3DP only conveys models that are under Creative Commons 4.0 Licence. All3DP will never convey STL files which are marked with the non-commercial use licence (CC NC). Also, according to CC BY, we give attribution where needed. If you are the designer of a model and want to be removed from All3DP’s price comparison service, please send a mail to contact@all3dp.com.

Topics

Recommended for you