Featured image of Weekend Project: A $20 DIY Heated DryBox for 3D Printing Filament Storage
Weekend Project!

Weekend Project: A $20 DIY Heated DryBox for 3D Printing Filament Storage

Picture of Tyler Koslow
by Tyler Koslow
Feb 4, 2018

Want to keep your filament in tip-top shape? Engineer and 3D printing enthusiast RichRap shows us how to create DIY Heated DryBox for 3D Printing filament for under $20.  

No matter how finely tuned your 3D printer is, the quality of your prints are highly dependent on the state of the filament you’re feeding through the extruder. Some 3D printing materials are highly susceptible to moisture in the air, which can result in poor quality prints. Before printing, these spoiled filaments need to be kept in an airtight container with desiccant and dried out in the oven.

On today’s Weekend Project, we’re sharing the DIY Heated DryBox created by engineer and renowned 3D printing enthusiast RichRap. Not only does this contraption keep your filament properly stored, it also has the capacity to actively heat the material while printing. More importantly, the entire project shouldn’t cost you anymore than $20 – $30, depending on where you source your materials.

Let’s dig a bit deeper into what you’ll need to build a DIY Heated DryBox.

DIY Heated DryBox: What Do You Need?

There is some 3D printing involved in the assembly of the DIY Heated DryBox. But it also requires some other inexpensive parts. Here’s what you need:

DIY Heated DryBox: Putting it all Together

The first thing you’ll need is a plastic storage box that holds at least 11 liters and has a lid. You can likely find one at your local hardware store or on Amazon. It’s important that the height of the box is tall enough to fit an upright spool of filament, but the lid doesn’t have to be completely sealable.

RichRap also suggests using a Reptile Heating Mat as the heating element for the DIY Heated DryBox. He was initially inspired to create this solution after a trip to E3D, a UK producer of high-end 3D printing accessories. While visiting, he saw the company was storing its exotic and nylon materials in a plastic box that had this type of heater laid on top of it.

The temperature and humidity sensor is stored within a 3D printed housing. The heating element slides into the 3D printed base, and will rest underneath the filament to keep the environment toasty. You’ll also have to 3D print a spool. All of these files are freely available on Thingiverse or Youmagine.

Finally, two cable connectors are inserted in the front, allowing two different filaments to exit through tubing directly to the printer. Another cable connector is mounted in the back for the power cable of the heating element.

This project requires a bit of hands-on work, but the results that RichRap achieves without breaking the bank are truly impressive. While filament storage solutions like the Polybox are readily available, the DIY Heated DryBox is more versatile and costs a fraction of the price to create. On top of that, you get that sense of accomplishment that comes with completing any useful DIY project.

Learn more about the components on RichRap’s blog, and check out the video below to see the entire assembly process in action.

Recommended for you