Play has no limits, and neither does your 3D printer. You can take advantage of that fact by printing any number of accessories or mods for your PlayStation 5. We’ve gotten the process started for you by putting together our top 10 PS5 designs.
The purpose of this list is to put together 3D prints that upgrade your PS5, thus we prioritized function over aesthetic, but that didn’t eliminate one or two cool decorative prints that make your PS5 allegiance clear.
We know that there are many different types of gamers out there and have done our best to include accessories that can upgrade the experience of casual gamers, FPS diehards, sports junkies, and racing addicts alike. We’re sure our top 10 has something for everyone.
Let’s dive in!
DualSense Aim Thumb Stick
This print comes in a massive variety of models, with each tailored to a specific improvement on players’ grip or aim in FPS and racing games. These grips are also compatible with PS4s if you haven’t managed to snag a PS5 yet.
These thumb mods print in two parts, with a top that needs to be twisted onto the bottom before attaching to DualSense or DualShock controllers. The designer does warn that some stringing is common, so be sure to clean that up in post-processing before putting any grips to use. Also, be sure to select the correct bottom files for the PS5 or PS4, depending on your system.
- Who designed it? Jerooney
- How printable/popular is it? 14 makers have shared their prints, and 5 others have remixed the design.
- Where to find it? Thingiverse
DualSense Controller Stand
This controller stand is the best of both worlds. It features a decorative PS5 logo to show guests where your allegiance lies, and it’s functional too, keeping controllers organized and preventing gamers from losing track of where they tossed their DualSense after their last session.
No supports are needed for this model, just make sure to print it on its side. 20% infill or higher is recommended by the designer to keep the stand strong beneath the weight of the controller.
- Who designed it? James47889
- How printable/popular is it? This design has 16 makes as well as a remix.
- Where to find it? Thingiverse
One-Handed DualSense
Whether you can’t use your left hand or simply want to text while you game, this controller add-on will make your life easier. It allows a player’s right hand to control both sides of the buttons on the PS5 controller and helps across a wide range of game genres.
This accessory prints in several pieces that need to be assembled, but none of them need supports. The designer printed most of the parts in standard PLA but does recommend TPU for one piece that needs more flexibility. If you don’t have any TPU, they recommend adding several extra rubber bands for increased grip. Once assembled, it easily snaps onto the DualSense.
- Who designed it? Akaki
- How printable/popular is it? At least five makers are enjoying one-handed PS5 sessions, while the three remixes all look like elaborate torture devices for your controller.
- Where to find it? Printables
DualSense Phone Mount
Speaking of texting, this accessory allows players to attach their phone directly to the PS5 controller. No need for a second TV screen when you can watch the game or your favorite anime directly in front of you – all the while still gaming on the big screen.
This print requires a few distinct pieces to be assembled before snapping the mount onto your controller and trusting it with your phone. The designer recommends printing with PETG at 15% infill for proper strength, but other commenters say the prints worked with PLA, too.
- Who designed it? NiH
- How printable/popular is it? This design has three makes and two remixes.
- Where to find it? Printables
PS5 Controller Hanger
If gaming is all about the squad for you, this controller hanger is perfect for your next hang-out: It keeps all four controllers organized. The hanger also works for any Xbox players jealously browsing this list.
The hanger prints in two pieces that snap together before sliding onto the PS5. It doesn’t require any supports, and it can be printed with PLA, PETG, or any other rigid filaments of your preference.
- Who designed it? sa_shadow
- How printable/popular is it? This design has four makes as well as four remixes.
- Where to find it? Thingiverse
External PS5 SSD Enclosure
A gamer’s biggest nuisance (other than lag) is when their system runs out of memory, and they have to start deleting files to play the latest release. It makes sense that many turn to external storage to combat this problem. Now, with this PS5 solid-state drive (SSD) enclosure design, you’re able to keep the entire setup on theme and matching.
Be sure to check the measurements of your SSD against this design before printing. Several makers in the comments have mentioned it being slightly too small or too big to fit their drive correctly. Others had to adjust the location of the hole for the wire.
- Who designed it? PjotrStrog
- How printable/popular is it? Six makes have been shared thus far.
- Where to find it? Printables
LED PlayStation Icon
Nobody needs to ask if you’re an Xbox or PlayStation gamer when they see this LED light watching over your gaming setup. Its glow can also reduce the strain on your eyes from a marathon basement gaming session without any lights except for the screen.
The PlayStation icon prints in place without supports, then needs to be glued onto a wooden base with LED lights to illuminate it. Originally printed on the popular Ender 3, the designer recommends a 0.2-mm resolution.
- Who designed it? smart3dprint
- How printable/popular is it? This design has been downloaded nearly 500 times, and there’s a community make.
- Where to find it? Cults
PS5 Steering Wheel
No need to break the bank by buying a steering wheel accessory when you can print your own miniature version and dominate the track. This design was adapted for the PS5 controller; it was originally a remix of a popular PS4 wheel with over 50 posted makes.
The designer recommends printing with 25% infill and supports for the components, then gluing them together. It was originally printed with ABS for added durability when racing through the final turn before the finish line.
- Who designed it? 3Definitive
- How printable/popular is it? This design has three makes as well as a remix.
- Where to find it? Thingiverse
DualSense Joystick
This adapter easily turns your DualSense into a fight stick, perfect for any old-school players who want to mod their controllers like they’re playing an arcade first-person shooter. It can easily be printed twice, depending on the game you’re playing and the need for one or two joysticks.
No supports are needed, and the parts print as oriented. The designer recommends printing with three perimeters at a 0.2-mm layer height.
- Who designed it? akaki
- How printable/popular is it? This design has nearly 500 downloads, and a make has been shared.
- Where to find it? Thingiverse
Controller & Headset Holder
If you’re a serious gamer, you need to keep more than just a controller organized. That’s where this holder comes in: It has a special hook specifically designed to hold your headset when you aren’t being screamed at by a 12-year-old.
The comments beneath this design don’t show any community prints yet, but one does mention this accessory has sold 54 copies on Etsy. It prints without supports and can be done with standard PLA.
- Who designed it? Diilandh
- How printable/popular is it? There are over 1,600 downloads but no community prints have been shared yet.
- Where to find it? MyMiniFactory
License: The text of "10 Special PS5 Mods & Accessories to 3D Print" by All3DP is licensed under a Creative Commons Attribution 4.0 International License.