Featured image of Meet the New Nikon SLM MachX: The Expandable 8 kW Metal 3D Printer Built for Series Production Source: Nikon SLM
This article is free for you and free from outside influence. To keep things this way, we finance it through advertising, ad-free subscriptions, and shopping links. If you purchase using a shopping link, we may earn a commission. Learn more
A Matter of Density

Meet the New Nikon SLM MachX: The Expandable 8 kW Metal 3D Printer Built for Series Production

Picture ofCarolyn Schwaar
by Carolyn Schwaar
Published Nov 18, 2026

Three build sizes, up to 8 kW of laser power, and changeovers in as little as 25 minutes are part of a push to get more production out of existing factory space.

  • The MachX 450 offers a 450 × 450 × 450 mm envelope, while the MachX 450C extends Y to 600 mm and the MachX 450E extends Z to 1,000 mm.
  • MachX laser options are four 1-kW, eight 1-kW, or four 2-kW lasers.
  • MachX users can carry over existing process parameters from Nikon SLM Solutions’ NXG product line.
Advertisement

Nikon SLM Solutions is putting factory floor efficiency at the center of its latest metal 3D printing platform. Unveiled at Formnext 2026 in Frankfurt, the new MachX metal laser powder bed fusion (LPBF) is designed for series production, with a modular architecture that allows manufacturers to expand capacity by adding machines, laser power, and automation rather than replacing equipment.

The company calls its approach “throughput density,” a measure of production output relative to floor space. Instead of focusing solely on how quickly an individual machine can print, MachX is designed around the practical demands of operating multiple systems on a production floor.

One Platform, Three Sizes

The new MachX is smaller than the company’s massive NXG series, but packs in new tech for higher throughput, Nikon SLM says (Source: Nikon SLM

The printer comes in three configurations sharing the same underlying platform, software, and process architecture. The MachX 450 offers a 450 × 450 × 450 mm build envelope for general industrial applications. The MachX 450C stretches the Y axis to 600 mm to accommodate longer, flatter components, while the MachX 450E extends the Z axis to 1,000 mm for tall parts, including rocket engine thrust chambers.

The shared architecture also allows process parameters and production knowledge to transfer between models. Nikon SLM Solutions says MachX retains several important elements of its NXG product line, enabling users to carry existing parameters and experience over to the new machines.

Laser configurations range from four 1-kW lasers to eight 1-kW lasers or four 2-kW lasers, delivering up to 8 kW of total system power. Gaussian and top-hat beam profiles provide options for different materials and part requirements, while modular laser and monitoring packages can be upgraded after purchase.

Copper is not yet on the material menu it for the new MachX, but as soon as parameters are set, it will join the list, Nikon SLM told All3DP (Source: All3DP)

Keeping the machines productive between builds is another focus. Preheating and cooling can take place at a dedicated station within the machine but outside the build chamber, and an optional cylinder-exchange system allows build cylinders to be swapped between jobs. Nikon SLM Solutions claims changeovers can take as little as 25 minutes, including preheating.

Integrated closed-loop powder management, supported by a 230-liter Universal Powder Tank, is intended to enable extended production runs. Interfaces for automated material handling and shared depowdering allow multiple MachX systems to be organized into a connected production cell.

The company illustrates its floor-space strategy with the MachX 450E, which accommodates approximately 200 liters of build volume in a footprint of roughly 13 square meters. Its premise is that manufacturers can increase production capacity within existing facilities rather than expand the facilities themselves.

Keeping Production Consistent

The new MachX at Formnext 2026 attracted a crowd (Source: All3DP)

MachX also debuts SLMX, what Nikon calls its adaptive process ecosystem, which combines thermal control, simulation, layer monitoring, and process intelligence. The company positions these capabilities as a way to maintain consistent performance across successive production builds.

“The first system a customer buys is the start of their production line, not the limit of it,” says Simon Merkt-Schippers, executive vice president of product management at Nikon SLM Solutions, emphasizing the platform’s expandable design.

MachX is making its public debut at Formnext 2026, Nov. 17-20, in Hall 12.0, Booth D119, where Nikon SLM Solutions is exhibiting the system, its three build configurations, and printed parts.

You Might Also Like:

About the Author:
Carolyn is All3DP’s senior editor and a journalist with 25+ years covering business and technology. Passionate about making tech accessible, her work also appears on Forbes.com.
Advertisement
Advertisement
Advertisement