Kinda Sus
If you haven’t been playing Among Us or don’t know much about it, it’s a mystery crime game where a crew tries to find the imposter on board their ship. Meanwhile, the imposter’s mission is to eliminate the rest of the crew before they figure out their identity! Every round, the crew, including the imposter, vote out one player who may or may not be the imposter.
As this game has gained popularity, people have started 3D printing the different characters and objects from the game. Here, we’ve found 10 great Among Us designs that you can 3D print as your next task to complete.
If you want to bring your inner imposter to life but don’t have the time or tools to 3D print at home, check out Craftcloud by All3DP. With suppliers all over the world offering a huge range of materials and colors, you’ll be assembling your new crew in no time!
Now, stop completing tasks, and let’s take a look at these definitely-not-suspicious models!
Dead or Alive
Because Among Us doesn’t have different characters, other than colors and optional accessories, all players are one of two things: dead or alive. This Among Us character is split into a few different pieces, including the head, visor, legs, bone, and guts.
The character’s head can be snapped into place on the body (and snapped off) to reveal the bone. To make your model more colorful, you should print the different pieces in different color filaments. This model also has a magnetic variation where magnets are attached to the head and body so you can connect and disconnect them more easily.
Although the designer provided no printing tips, a recorded maker used a 0.2-mm layer height and a 20% infill. The maker also used a raft to print the model in PLA.
Who made it? alpokemon
Who printed it? This model has 45 recorded makes, 10 remixes, and almost 20,000 downloads. You should definitely be able to print this model, as so many people have already successfully done so.
Where to get it? Thingiverse
Plant Pot
This crewmate design has a passion for gardening; you can use this Among Us plant pot to hold a small indoor plant. This model, as seen in the image above, is of an Among Us character sitting down.
No printing tips were provided for this design, except that it’s easily scalable. Print a few in different sizes for different plants!
Who made it? ozammo13
Who printed it? This plant pot design has about 1,000 views and more than 100 downloads, so hopefully it’s not too long before someone shares their print.
Where to get it? Cults
USB Holder
Got some photos on your phone or computer that are taking up too much space? This model is a fun solution to store all your secrets in an innocent model on your desk. Or is it an imposter?
This design prints to about 3 inches tall, and you will naturally have to supply the USB to be inserted. The print looks pretty straightforward and shouldn’t require supports or anything else tricky.
Who made it? q8rc
Who printed it? This USB holder design has almost 200 views and 14 downloads, but it was only uploaded in October so it’s still early days!
Where to get it? MyMiniFactory
Ghost
Once you are killed or eliminated in a game of Among Us, you become a ghost. Ghosts can still do tasks but can’t communicate with the alive crew members. This model is of a “ghostmate” who the maker assures you was innocent.
The maker recommends printing this model with a 0.2-mm layer height and a 5-10% infill. It prints in one piece and is designed to be printed without supports.
Who made it? petroski
Who printed it? This ghost design has one recorded Make and more than 2,000 downloads.
Where to get it? Thingiverse
Cookie Cutter
It’s always a good idea to have some snacks on hand while playing a game of Among Us. As the designer simply states, “it cuts cookies”. This Among Us-themed cookie cutter only has detail in two dimensions, meaning no supports are needed for this print.
Printed at 100%, this cookie cutter measures about 2 inches. Scale it up or down for your specific cookie needs.
Who made it? parkcraft99
Who printed it? This delicious design has over 1,700 views and nearly 300 downloads, and it would be an easy print as it’s all flat!
Where to get it? MyMiniFactory
Crew with Hats
This collection of Among Us models includes the standard player and a few of the different available hats that you can add to your avatar. The collection includes the cheese, plant, Viking, toilet paper, stethoscope, brain slug, knight helmet, and straw hats.
The creator of this design suggests using supports, but no raft for these prints. A recorded maker posted a successful model and used a 0.2-mm layer height and a 5% infill to print this model in PLA.
Who made it? Liang0108
Who printed it? This accessory set has six recorded Makes and three Remixes which add some extra hats into the mix.
Where to get it? Thingiverse
Earrings
This model is of an Among Us character that is a simple stud earring. It’s designed with a small hole on the back to allow for attaching the post. This structure does mean that this design has overhangs, so you might want to print with supports activated, but the miniature scale might mean it’s okay without.
The designer hasn’t provided any details about how to print this model, but check out our article on 3D printed earrings for some tips. You will, of course, need to get some earring findings, and print this twice if you wear earrings in both ears!
Who made it? chistychiavo
Who printed it? This Among Us earring design has six likes and 26 downloads so far.
Where to get it? MyMiniFactory
Imposter
The imposter in Among Us can eliminate a player in various ways, one of which is the mouth spike. This model shows an imposter mouth-spiking another player. The model is split up into the two characters as one part and the spike as another, which can then be glued together.
The designer recommends splitting up the file with the two characters to print them separately, and using a raft of at least two layers to print the spike. This model doesn’t have separate pieces for the visors or guts, but painting them looks great!
Who made it? M_Dima
Who printed it? This imposter model has three recorded Makes and three Remixes from over 4,000 downloads. It does take a bit of assembly, but everyone’s prints look great!
Where to get it? Thingiverse
Keychain
This Among Us keychain design is split up into a few different pieces, which allows you to print it in multiple colors. You can print the body and backpack in one color and the visor in another to make this model as close to the game as possible.
The maker recommends printing this model at a 35% scale and with a 0.2-mm layer height. If you do want to hang this on your keys, you’ll need a split ring keychain.
Who made it? portegariera
Who printed it? This keychain design has nearly 300 downloads and over 2,000 views. It looks like a simple print, so why not be the first to share a photo?
Where to get it? Cults
Lamp
Lastly, to lighten up this list a little bit, this Among Us LED lamp will give you the light to play all day. The maker designed this lamp to work with a USB LED light, but to do this you’ll need to split the file into two parts in order to print the visor in a different filament. With a light inserted, the crewmate’s visor will glow!
The designer advises you to print this model in PLA with a 0.3-mm layer height and supports activated. The maker also suggests using gradual infill and scaling down if you want.
Who made it? VasiliAth
Who printed it? This Among Us lamp design has six likes and 11 downloads so far, but it was only uploaded in October!
Where to get it? MyMiniFactory
Lead image source: Xerxes3rd via Thingiverse
License: The text of "Among Us 3D Prints: 10 Models That Are Definitely Not Sus" by All3DP is licensed under a Creative Commons Attribution 4.0 International License.