If you could spice up the decor in your home, why not make the bathroom look nice too? When you’re lacking some bathroom, sink, or shower items, 3D printing can come in handy.
In this article, we’ll present you with 15 great 3D printable accessories that will turn your WC into a tidy and functional space.
If you see an item you like but don’t have the desire or means to 3D print it yourself, check out Craftcloud by All3DP. With a range of materials and finishes, your bathroom will be looking better in no time!
In this first section, we’ll go over a few models for your shower. Don’t get wet!
This soap dish is great for storing your soap bar in the shower or on the sink. It’s split up into two parts: a base container and grill. The grill allows for dissolved soap particles to flush out, so they don’t solidify later.
Who made it? Steve5092
How popular/printable is it? This soap dish model has 4,000 views and 463 downloads. Although there are no shared community prints, one user commented with a picture of their successfully printed soap dish, so making this model is definitely possible.
Where to get it? MyMiniFactory
It’s super annoying when stuff falls in the shower or hair gets clogged in the shower drain. And metal drain grates can be sharp, making it harder to remove anything that’s stuck and sometimes even painful to stand on! Not so with 3D printing!
The maker listed the print settings they used to successfully make this print, including that they used PLA with a 20% infill and a 0.1-mm layer height.
Who made it? fantur
How popular/printable is it? This shower grate has over 600 downloads. It’s a simple and functional print, why not try it yourself?
Where to get it? Thingiverse
Towels need to be able to dry completely, or they’ll start to smell. This print involves two parts that encase a cylindrical pole, which, as the designer recommends, could be a broomstick. To mount this to your wall, use the four screw holes (two on each of the parts).
Although were no real printing tips, the designer listed that they printed this model with an FDM printer and categorized this as an easy print.
Who made it? HamzaKhattab
How popular/printable is it? This towel hanger model has over 200 downloads and 2,000 views.
Where to get it? MyMiniFactory
Next up, this print can turn a boring old shower head into a waterfall. According to the designer, this shower head produces a high-pressure water stream and fits a standard shower head mount. When printed correctly, this showerhead should be pretty reliable, as the designer’s has been working for six months and counting.
The designer states they used a 100% infill and a 0.2-mm layer height to print in PLA. If you print the model standing up with the long, thin part facing upwards, you won’t need supports.
Who made it? marqui100
How popular/printable is it? This model has 4 recorded Makes, 2 Remixes, and over 11,500 downloads.
Where to get it? Thingiverse
Ever not have enough space for all your shower accessories? This design utilizes the showerhead to attach a hook that can hold whatever shower accessories you need.
The creator of this design states that two hooks can be attached back-to-back, for double the storage space.
Who made it? spch
How popular/printable is it? This shower hook model has over 160 views and 4 downloads.
Where to get it? Cults
Did your shower head mount brake, or do you just not have one? No worries, this model should work for you. With two mounting screws, it should attach securely to your wall.
Who made it? raab6
How popular/printable is it? This useful showerhead mount has over 300 downloads and almost 3,000 views!
Where to get it? MyMiniFactory
In this section, we’ll present you with a couple of models to make your toilet paper holders more fun.
Changing the toilet paper can be a pain, but luckily, this design makes it easy to replace. Just push a roll from beneath, and voilà. This mechanism is made up of four 3D printable parts, and you’ll also need some other hardware, including screws and an axle. You can check out the project page for more assembly information.
Although the designer didn’t provide any printing suggestions, one recorded maker posted a great print and listed their printing tips. The maker specified that they used PLA, a 0.32-mm layer height, and a 5% infill.
Who made it? dragonator
How popular/printable is it? This toilet paper holder has 20 recorded Makes, 6 Remixes, and over 13,200 downloads!
Where to get it? Thingiverse
Don’t have floor space to store extra toilet paper? Well, you can move it to the wall using this great modular print. Depending on how many rolls you want to store, you could align two or more shelves on your wall and stack the rolls upwards.
This print is designed for rolls that are 12 cm in diameter. The maker posted that they printed this model in PLA using a 50-mm/s print speed and a 50% infill.
Who made it? harakys
How popular/printable is it? This toilet paper storage model has 2 recorded Makes and almost 5,000 downloads.
Where to get it? Thingiverse
In this next section, we’ll go over a few models that you can use to organize and improve your sink area.
With this turbine sink head, you can make your faucet produce a cool water stream in a unique pattern. You can adjust the tightness to change how (in which pattern) the water comes out. This model should fit a 24-mm thread sink head, though you may need a rubber seal as well.
While the creator of this design didn’t provide any printing tips, one recorded maker listed that they printed the model in PLA with a 0.25-mm layer height and 100% infill.
Who made it? madsoul666
How popular/printable is it? This turbine sink head has an impressive 41 recorded Makes, 6 Remixes, and over 20,600 downloads.
Where to get it? Thingiverse
Don’t let your toothbrush get dirty! This toothbrush cap covers your toothbrush to prevent any other stuff from getting on it. It’s perfect for traveling when you want to throw your toothbrush in your bag.
This design’s creator listed that they used a 25% infill to print this model in PLA. Print a few in different colors to remember whose toothbrush is whose!
Who made it? Coco Paq
How popular/printable is it? This toothbrush cap design has almost 1,100 downloads and over 6,400 views.
Where to get it? MyMiniFactory
Need to organize multiple toothbrushes? This neat model holds up to five toothbrushes, with a designated area on the top for your toothpaste tube.
The designer of this bathroom organizer provided some of the print settings used to make this model, including a 20% infill and a 0.2-mm layer height. The maker also added that they printed this model in PLA.
Who made it? Churuata3D
How popular/printable is it? This toothbrush and toothpaste organizer has over 1,500 downloads and over 8,300 views.
Where to get it? Cults
You can make your bathroom look extra nice and disguise your shop-bought soap with this 3D printed soap dispenser cover. The leaf pattern even still lets you see what’s inside so you’ll know when you’re running low.
Who made it? Kirby Downey
How popular/printable is it? This soap dispenser cover has 186 downloads and over 4,500 views.
Where to get it? MyMiniFactory
We’ve all been there: It’s late, you’re tired, and you’re nearly out of toothpaste, so you’re squeezing the tube as hard as you can. Now, things can be much easier. With this toothpaste tube squeezer contraption, you can easily get every last bit of toothpaste out!
This mechanism comprises three 3D printed parts, and the design has been updated to improve the gadget’s functionality. There’s now a lock feature to prevent the tube from unrolling, which should be very useful.
The maker listed that they used a 100% infill, no raft, and no supports to print this device.
Who made it? ottenjr
How popular/printable is it? This incredibly popular tube squeezer design has 341 recorded Makes, 28 Remixes, and over 452,800 downloads. You should definitely be able to print this model as so many others have already successfully done so.
Where to get it? Thingiverse
Lastly, we’ll go over a few designs that you can use for your hair and hair accessories.
Hair ties easily go missing and you can never find one when you need it. Make sure you know where yours are with this cute octopus hair tie holder.
One maker successfully printed this model in PLA with no raft, no supports. It looks like a very straightforward print, so should be quick and easy.
Who made it? zpbruno
How popular/printable is it? This octopus hair tie holder has 1 recorded Make and 784 downloads.
Where to get it? Thingiverse
Another thing that you can never find when you need is a comb! This simple and small hair comb was designed in Fusion 360.
The maker listed a few of the print settings they used, including a 0.20-mm layer height and a 20% infill.
Who made it? Desktop_Makes
How popular/printable is it? This model has over 1,700 downloads as well as 162 downloads.
Where to get it? Cults
Do you need a place for your hairdryer? This holster can be mounted to a wall or cabinet using the four screw holes in the design. There’s a slight curve with a wider intake to fit most hairdryers.
The model was designed to be printed in a vertical orientation and the maker listed a few of the print settings they used. They printed in PLA with a 0.2-mm layer height and no supports.
Who made it? engrkris
How popular/printable is it? This model has 6 recorded Makes, 2 Remixes, and over 2,700 downloads.
Where to get it? Thingiverse
Lead image source: phokur via Thingiverse
License: The text of "3D Printed Bathroom Accessories: 15 Useful Models" by All3DP is licensed under a Creative Commons Attribution 4.0 International License.