3D Printer Troubleshooting
Regularly spaced bulges around a print's sides could be Z banding, and Z wobble might be the underlying problem. Learn how to diagnose and fix it!
If your nozzle is partially clogged, the 3D printer cold pull is your first line of defense. Read on to learn how to do it!
Elephant's foot is a 3D printing problem that's not often discussed but is often experienced. Learn how to stop it easily!
Wondering what causes layer shifting in 3D printing? Check out six easy tips and tricks to prevent a 3D print layer shift!
Cura's fuzzy skin feature generates a rough exterior surface on 3D prints. Learn when to use it, how it works, and what settings control it!
A necessary evil for makers is 3D printing overhangs. Learn all of our tips and tricks for mastering extreme 3D printing overhangs!
Your 3D printer may have a Bowden tube in its extrusion setup, or it may have a direct extrusion system. Read all about the former!
Support Z Distance in Cura can make removing supports a breeze! Read on to learn about this setting and how to tune it for your prints.
Top layer problems can be devastating. See how to avoid 3D print pillowing before it strikes and ruins an otherwise perfect print!
Blobs, strings, and jams are a pain! Check out these four simple solutions that'll fix your 3D printer over-extrusion problems forever!
A well-calibrated 3D printer always gives better results. Check out the best calibration cubes for the job, with tips on how to use them!
3D printing spheres or spherical objects can be a challenge. Read on for a few tips to improve print quality for 3D printed spheres!
Can you trust the dimensional accuracy of your 3D prints? Find out how to easily test and improve your tolerances.
If you're looking to try a new print bed adhesive, check out our tips on the best hairsprays for your 3D printer.
A clicking extruder can be irritating and lead to failed 3D prints. Read on to find out a few easy ways to eliminate this problem!
Is your shiny new Klipper machine saying you're moving out of range? Learn how to fix it and stay in bounds!
Get a smooth, even first layer with mesh bed leveling. We explain the leveling process and show you how to implement it yourself!
Proper 3D printer maintenance is essential to keep your machine running and performing well. Find out what's required and why.
Supports falling off mid-print? Z Hop can help! Learn how to use this setting in Cura to improve your prints.
Clogged nozzles are painful. Read on to find out what exactly makes 3D printer cleaning filament special, and how to use it!