The Pick
Those of you who were able to get ahold of the Xbox Series X or Series S consoles, we’re very jealous! These were some of the most sought after gifts of the year and are now basically out of stock everywhere. This list of printable accessories is for those lucky few able to get one, or for those hoping to get one soon.
When compiling this selection, we’ve generally prioritized function over aesthetic. We’ve also found some designs that are alternatives to products that are available to purchase, but at a much higher price.
It’s challenging to compile a list of the best accessories, as there are many different types of Xbox gamers with different priorities for their setup. In the end, we think we’ve found a good mix of items for different gamers, whether you’re looking for a full-sized joystick to land a plane or a snack bowl attachment to refuel mid-game.
If something from this list piques your interest but you don’t have a 3D printer (or the time) to make it with, consider Craftcloud by All3DP. With professional partners around the world, you can have your dream upgrades delivered right to your door.
Now, to the list!
Console
These prints are all to improve your Xbox console’s appearance and keep it protected!
Bottom Cover
The Series X is bold in design and as such is meant to be a feature piece in your space. You want it to draw attention and get people to say “wow”!
Frustratingly, part of this design is an eyesore of a round rubber base on one end. Thingiverse user d3rdav3 has taken care of this, designing a cover for the rubber base which fits in with the rest of the console’s aesthetic.
Who designed it? d3rdav3
How popular/printable is it? No one has published any Makes, yet, but YouTuber mpoxDE featured a printed model (shown above) and praised it for making the Xbox Series X look as good as the PS5.
Where to find it? Thingiverse
Risers
Keeping your Xbox Series X in pristine condition is important for most, considering the price tag. Unfortunately, if you want to lay it down on its side, there are no rubber feet to protect the console’s surface.
Luckily, Thingiverse user 3Deth has designed a simple set of plastic risers to solve this issue. They rest under the corners of the Xbox Series X and raise it up so that the console is not touching the surface, helping prevent unwanted scuffs and marks on the surface.
For extra security, you may also like to add a layer of foam or something else soft between the riser and the console. Alternatively, there’s also a file to print individual feet.
Who designed it? 3Deth
How popular/printable is it? No Makes have been published yet, but for best results, the creator recommends printing this in TPU so no marks are left on the console.
Where to find it? Thingiverse
Base Station with LEDs
We can’t let the PC Master Race community have all the RGB! If you feel like your Series X is lacking in the lighting department, then this base station print has what you’re looking for.
The LEDs are actually an optional extra, as the design is primarily intended to raise and ventilate the console. If you do want to add the lights, you’ll need an LED strip and a power supply, in addition to the printed part.
The Series X does need to be upright to be able to sit in this base, but the impressive effect will clearly be worth rearranging your consoles.
Who designed it? EnemyofGLaDOS
How popular/printable is it? In addition to the designer’s print, there’s one Make and one Remix of this RGB upgrade.
Where to find it? Thingiverse
Gameplay
The controller is at the heart of gameplay. Check out these great prints that will take your capabilities to the next level!
Mini Steering Wheel
When using the bare joystick to drive, do you tend to weave from one extreme to the other, or is that just us?
If you’re not all that keen on (or skilled at) driving with a joystick, this is a must-have upgrade. This small steering wheel clips onto the controller that you can use to actually steer, rather than navigate, with the joystick.
We can hear you asking, what’s the catch? None really, you’ll only need one 608 bearing to use this mod.
Who designed it? pixel2
How popular/printable is it? There have been 79 Makes, with the majority in PLA.
Where to find it? Thingiverse
HOTAS Joystick
Hands-on throttle and stick (HOTAS) flight control systems make flight simulators very immersive to play. Unfortunately, many of these solutions, especially the decent ones, can be almost the same price or even more expensive than the console itself.
This is where Thingiverse user akaki comes in. They have designed a fully 3D printed HOTAS control system that clips directly onto your Xbox controller. No extra parts required!
Who designed it? akaki
How popular/printable is it? 14 people have shared their Makes, printing in either PLA or PETG.
Where to find it? Thingiverse
FPV Simulator Thumbstick
If you play any FPV titles, you know that the precision you can get with a joystick is often less than ideal. Luckily, benxfactor from PrusaPrinters has designed control sticks that clip straight onto a controller’s joysticks, providing more familiar controls for the FPV community.
An additional benefit of this model is for those with limited control or dexterity in their hands. This add-on is easier to grasp and control than a traditional joystick, potentially offering a better gaming experience.
Who designed it? benxfactor
How popular/printable is it? There has been at least one print of the item, as indicated in the comments. Depending on which controller you have, you may need to scale this slightly to fit.
Where to find it? PrusaPrinters
Gyro Bowl Holder
One of the downsides to gaming is that you often need to get up to get snacks, or worse, in an intense moment of battle, you knock the snacks all over the floor. Not fun!
One ingenious maker has designed a controller attachment to hold a gyro bowl that will resist spilling when jostled, which we all know can frequently happen when gaming. This accessory also has the added benefit of your snacks being right in front of you, and the considerate inclusion of a wet wipe holder (to keep your greasy fingers away from your lovely new controller).
The attachment is designed to fit this gyro bowl. If you’re considering printing your own bowl, make sure to think about food-safe filament options first.
Who designed it? noycebru
How popular/printable is it? There have been no official prints for this item, but it has gotten a lot of attention across social media, such as on Reddit. Unfortunately, the bowl attachment is not quite clever enough to stop you from getting covered in Cheeto dust.
Where to find it? Cults
Controller Storage
When not in use, you need to store your controller somewhere. Read on to see cool ways to display controllers while keeping them safe.
Wall Mount
This wall mount allows you to both store your controllers in an easy-to-reach place and show them off. This is especially great if you have some special ones!
Thoughtfully, the model has mounts for adhesive strips or screws, depending on your preference and the surface you want to attach it to.
Who designed it? mrfochs
Who printed it? There have been no Makes of this design yet, other than the designer’s, but there is a Remix to make it a better fit for a Switch controller.
Where to find it? Thingiverse
Tripod Mount
You can use stand-up desks to work at a computer, so why not apply the same principle to gaming?
Cults user noycebru saw this potential and designed a mount that allows you to attach your Xbox controller to a tripod. This not only means that you can stand while gaming, but also that if you let go, it will stay in place. You’ll no longer need to try to hold on when wanting your hands for snacking or texting!
This stand is designed for Xbox One controllers, but the profiles are very similar so it should work for the newer models. (All the Xbox One controllers will still work with the Series X/S consoles, anyway.)
Who designed it? noycebru
How popular/printable is it? This design has been viewed over 1,100 times, though no prints have been shared apart from the creator’s.
Where to find it? Cults
Stand
If you have more than two Xbox controllers, storing them can be a bit of a headache since most of the stands you can buy only fit two controllers.
This stand holds four controllers in a compact space with no additional hardware apart from a couple of small (Red-Bull-sized) energy drink cans. With this model, you’ll get the good feeling of upcycling as well as a functional controller stand!
Who designed it? Frosty48
How popular/printable is it? No community prints have been shared for this stand, but over 230 people have downloaded the design.
Where to find it? MyMiniFactory
Stand with Logo
Want a bit more character to a controller stand? This model integrates the Xbox logo like a plaque to give it extra style.
It does only support one controller, but it’s quick and easy to print so you can display all of your controllers in no time. You can also mix and match colors, with separate files to print the stand and logo. Color coordinating or using glow-in-the-dark filament can make this design really pop!
This is another design intended for Xbox One controllers, but it should hold your Series X/S controllers just as securely and with just as much style.
Who designed it? ideawizard
How popular/printable is it? There have been 166 makes of this design, in both PLA and PETG.
Where to find it? Thingiverse
Bonus: Keychain
Even though this is not a design for the Series X/S or controller, we thought it would be a nice inclusion for those who do have one, to show off that you’re one of the lucky few. Though for most of us, this might be the closest we will get to having a next-gen Xbox for quite a while!
Who designed it? mattat
How popular/printable is it? No Makes have been published yet. We assume that’s because everyone is still trying to get their hands on the Series X…
Where to find it? Thingiverse
Lead image source: noycebro via Thingiverse
License: The text of "Best 3D Printed Xbox Series X/S Accessories" by All3DP is licensed under a Creative Commons Attribution 4.0 International License.