While it’s true that there are many phone stands out there available for purchase, 3D printed versions are often customized for a specific task. This can make them really stand out.
On top of that (and most importantly), it’s fun to make your own! Whether it’s for the custom colors, unique designs, or a specific phone stand model that’s suited to a theme you like, the joy of creation is the reason many makers get into 3D printing. And there is immense satisfaction in printing items that can be used every day. A phone stand is the perfect intersection of creativity and practicality.
Without further ado, here are our top choices for great 3D printable phone stands. And if you see the perfect prop for your phone but don’t have the setup to print it yourself, try a printing service through Craftcloud!
Stationary
Although these phone stands may not be adjustable to your perfect viewing angle, they have their own draw to them. Whether it’s themed to your favorite series or is just plain cool to look at, you can trust these designs to display your device in style!
Troll
Let’s be honest, some phone stands are a little boring to look at! For a change of scenery, here’s an awesome troll phone stand that can spice up the otherwise boring features of your desk. The model includes a few very well-designed and detailed parts that are superglued together.
To really bring the troll to life, you can also add some paint like one of these impressive makes.
- Who designed it? artofgomes
- How printable/popular is it? Boasting over 7,200 downloads and several community prints, this fun troll captured the hearts of many.
- Where to find it? MyMiniFactory
Gaming Chair
When you sit down to start gaming, having your phone nearby can be handy to make sure you don’t lose track of time or miss an important call. What could be better than giving your phone its own gaming chair to sit in next to you?
This gaming chair stand has an opening in the bottom to pass a cable through and is an easy print requiring no supports.
- Who designed it? DriftGaming.eu
- How printable/popular is it? Four makers have shared their phone-scale gaming chairs.
- Where to find it? MyMiniFactory
Foldable
So far, the models have been larger and bulkier stands meant to sit on a desk or table, but this one is meant for taking with you on the go. It prints flat all in one piece, folds up into a stand, and then goes flat again when you’re done.
Being a print-in-place design, this model requires no supports and will work with your standard print settings. Just make sure your bed adhesion is on point for that important first layer!
- Who designed it? ClementCrd
- How printable/popular is it? From over 6,200 downloads, several prints of this portable model have been shared.
- Where to find it? MyMiniFactory
Print-in-Place
This phone holder is special not only because it prints all at once with no assembly, but it automatically holds onto your phone! It can be used in the car with a printable vent attachment or as a stand on a table.
Due to some tighter tolerances in the final product, test prints are included. The designer recommends using a standard 0.2 mm layer height or less, as well as 15-30% infill. It doesn’t need supports and prints all in one piece.
Tensegrity
The popular tensegrity structure has now been turned into a phone stand! Whether you’re looking to bewilder someone at the office or just want something to look cool on your desk at home, this phone stand will accomplish it perfectly.
The designer recommends printing with supports for the upper half of the model since it’s somewhat complicated, and they used 38% infill. The only other hardware needed is some string to tie the models together.
- Who designed it? winfordew
- How printable/popular is it? Four people have shared successful makes of this ingenious design, and there’s a remix that removes the need for supports.
- Where to find it? Thingiverse
Stormtrooper
For any Star Wars fans out there, here’s a great display piece that’s also functional! Featuring a Stormtrooper holding up your phone and a design theme similar to Star Wars mechanisms, this is a model that will encourage breaking out the paint set to add lots of detail.
The designer recommends a 0.25 mm layer height, and certain pieces will need supports. They also recommend printing with 15% infill but mention that it should be printable hollow.
- Who designed it? ray4510
- How printable/popular is it? There are 43 makes of this fan-favorite design, with 4 remixes.
- Where to find it? Thingiverse
Apple Watch
For those who have both an iPhone and an Apple Watch, this printable stand is the ultimate in convenience. It has an open spot for both a regular lightning cable and the Apple Watch charger to press in. This makes a great bedside stand to dock both your phone and watch at the end of the day to get them powered up for the morning!
This is a relatively simple print, but the model will need supports.
- Who designed it? CyberJack
- How printable/popular is it? Nine makers have shared their combination stands in a range of filaments.
- Where to find it? Thingiverse
Moby
While originally designed for employees of Moby Inc, the creator has since released this model to the public for all to enjoy. This beautiful whale tail has an integrated slot for a cable, meaning it doubles as a charging dock as well as a phone stand.
The designer recommends 10% or more infill, and it prints well in almost any layer height with no supports.
- Who designed it? Moby_Inc
- How printable/popular is it? This aquatic model has an impressive 2,800 likes and is approaching 50 makes on Thingiverse.
- Where to find it? Thingiverse
Walker
Sometimes losing a phone can make you feel like it grew legs and ran. This stand gives your phone some legs for the opposite reason; to make sure it can’t get away! It’s a highly detailed design able to be printed in multiple colors, and it has large feet for stable support. It would make a great gift for anyone interested in mechanical themes or robotics.
The creator recommends using a 0.2 mm layer height with 10% infill, and it does require support. There’s also a blank phone holder section if you’d prefer to lose the Android logo.
- Who designed it? Jacks-Filament
- How printable/popular is it? There have been 12,500 downloads of this robot-inspired design, and 16 makes have been shared.
- Where to find it? Thingiverse
Adjustable
These phone stands are meant to adapt to the situation. If you’re looking for a stand to hold your device while you work, then you’ve come to the right place.
Tilt
Featuring a sweet dual-gear design, this unique phone stand allows you to adjust the tilt angle of your phone as it rests on the stand. Apart from looking awesome, this design will be a functional addition to your workflow.
Keep in mind you’ll need glue to assemble this stand. Additionally, it’s recommended that you use 20% infill for the print, as well as electrical tape on the base of the stand to increase friction and prevent slippage.
- Who designed it? Matthew_Ghost
- How printable/popular is it? This model is a popular choice, with over 1,300 downloads and 27 makes on Printables. However, many have recommended sanding parts to make them move together in a smoother fashion.
- Where to find it? Printables
Modular
This mounting system not only holds phones, but things like cameras and headphones as well! A collection of different arms, stands, connectors, and adapters make this the ultimate customizable phone holder.
This model set includes printable M5 bolts to use, or they can be replaced with standard metal bolts. The creator highly recommends support for all pieces and printing with a higher infill percentage for strength in the parts.
- Who designed it? HeyVye
- How printable/popular is it? 25,000 people have downloaded this fully customizable design, with several prints shared on MyMiniFactory.
- Where to find it? MyMiniFactory
Screw Adjustable
Sometimes, you’ll need to dial in a precise setting for your phone stand to find the perfect position. While this may be tricky with other designs, it’s no problem with this awesome screw-adjustable phone stand.
The designer recommends printing the screw laying on its side with supports and printing the base without supports. Further printing tips were kindly provided by the designer in the model details.
- Who designed it? amarten1
- How printable/popular is it? With over 1,700 likes and 11 makes, many have chosen this model as their stand of choice!
- Where to find it? Thingiverse
Tripod
If you find yourself needing more durability, this tripod stand might be the right choice. With a versatile ball joint, adjustable grip, and foldable legs, it can handle whatever you throw at it. Just make sure your printer is well-calibrated.
While the original design is made for tight 0.1 mm tolerances, there are also files suitable for printers that need larger tolerances. Another advantage of this model is that it does not require any screws for assembly, which makes life a little easier. The designer has provided detailed instructions for assembling the model on Printables.
- Who designed it? DieZopfe
- How printable/popular is it? Nearing 1,000 downloads and 21 makes, many people have praised this model’s simple design.
- Where to find it? Printables
Compliant
Compliant mechanisms are one of the coolest applications of 3D printers. Thanks to the uniqueness of the 3D printing process, creating compliant mechanisms with a 3D printer is much easier than other manufacturing methods. This awesome phone stand utilizes compliant mechanisms to create a range of tilt angles whilst keeping the design as simple as possible.
Speaking of simplicity, the entire design can be printed in vase mode, which makes it possible to whip a few of these up quickly. Comments expressed some surprise about how sturdy the design turned out to be.
- Who designed it? rorys3D
- How printable/popular is it? This genius phone stand has over 3,100 downloads and an impressive 44 makes.
- Where to find it? Printables
Multi-Angle
This is a keychain phone stand with a rotating inner block, which allows for multiple viewing angles in a compact package. It’s a great print for those on the go, and it’s a simple design, meaning it’s an easy print as well.
Many print settings will work due to the simplicity, but a Cults user posted a make with 0.2 mm layer height and around 30% infill for strength.
License: The text of "3D Printed Phone Stand: The Top 15 Models of 2023" by All3DP is licensed under a Creative Commons Attribution 4.0 International License.