Following the popularity of the CR-6 SE on Kickstarter, a number of Creality backers and fans alike requested a machine with the same features, but more print volume. Creality listened, unveiling the CR-6 Max just days before the end of its Kickstarter campaign.
The CR-6 Max will offer all of the same features that made the CR-6 SE appealing, including automatic bed leveling, a touch screen, and other refinements, but will boast a bigger build volume of 400 x 400 x 400 mm. This will make the CR-6 Max the same size as the popular CR-10 S4 and nearly as large as the massive CR-10 Max.
With this in mind, the CR-6 Max is lining up to be a heavy hitter, and will likely become one of Creality’s largest – and most premium – large-format offerings.
It has an estimated price of around $800, making the Max roughly double the cost of its little brother, the SE. It was initially available as a part of the CR-6 SE Kickstarter campaign, but appears as though the CR-6 Max will be commercially available this fall. Will the combined size and features give enough performance to justify the price?
Let’s take a closer look at the specs to find out.
Given its announcement piggybacked on the hype of the CR-6 SE, there’s little information about the CR-6 Max. However, it is said to share most of the same features as the CR-6 SE, from which we can infer more specific details. These features and specifications may be subject to change as the Max is further developed.
The key difference between the CR-6 Max and the SE is, of course, the build volume. The CR-6 Max features a 400 x 400 mm build plate, with a towering 400-mm maximum build height.
This means that you will be able to print much larger than is facilitated by the CR-6 SE, without having to cut your model into pieces. As the printer is advertised to use a 24-volt power supply, it is likely that the heated bed will be able to reach higher temperatures quicker and more easily than has been possible on Creality’s earlier large-format machines.
Holding up the towering Z-axis are the supporting rods that Creality has previously dubbed “The Golden Triangle”. These metal supports help to reduce vibrations as the bed is moving back and forth.
The appearance of these is a welcome, if not somewhat expected, inclusion, and means that you will be able to print taller without having to worry about excessive Z-wobble as you reach the upper limits of the build volume.
The CR-6 Max features the same innovative leveling system as the CR-6 SE, using a force-based sensor. The Max will simply touch the nozzle to the bed at specific points, and a strain sensor on the hot end will detect the exact point at which the nozzle touches the glass.
This system is nice for a number of reasons. For one, there is no extra sensor probe, meaning you don’t need to calibrate any offsets other than the initial Z height to get the right “squish” in your first layer. Also, the automatic leveling system does away with the knobs on the underside of the bed, which will be a relief for anyone who has experience trying to level such large-format machines.
The CR-6 Max will also feature the same 4.3-inch portrait-oriented color touch screen as the CR-6 SE. For users who dislike the dial-operated blue LCDs of the past, this screen will be a welcome inclusion, allowing users to quickly and easily navigate the intuitive menus or check on the print status at a glance.
While not being as portable as the initial design of the CR-6 SE, the CR-6 Max will still feature many of the same quality-of-life features. The built-in tool drawer and folding filament holder both appear to be included on the CR-6 Max, which will be handy for storing the machine and its tools.
Additionally, the CR-6 Max will still have a carborundum (silicon carbide) coated glass build plate, offering the same kind of adhesion that makes the Anycubic Ultrabase so popular. This build plate will be removable, but you’ll have to be careful in doing so due to its massive size.
Additional features the Creality CR-6 Max will include:
The CR-6 Max is not currently available for sale. We’ll keep you updated as we receive more information.
License: The text of "Creality CR-6 Max: Review the Specs" by All3DP is licensed under a Creative Commons Attribution 4.0 International License.